Használati útmutató Vitek VTD-MD7CH

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Vitek VTD-MD7CH (4 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/4
VITEK
VTD-MD7CH
Vandal Resistant Mini Dome
Camera with 700 TVL
FEATURES:
• 1/3” Sony® Super HAD II CCD
• Sony Effio-E Digital Signal Processor (DSP)
• 700 TV Lines of Resolution
• 2.8mm Lens Included (3.6, 6, 8, 12 and 16mm also
available)
• Sensitivity of 0.0003Lux
• 2D-DNR - Two Dimensional Motion Adaptive Noise
Reduction
• Can be Semi-Flush or Surface Mounted
• IP-66 Rated Weather Resistant Aluminum Enclosure w/
Polished Chrome Finish
• 12VDC Operation
1
INSTALLATION
1) Align the camera unit with the
surface of the ceiling, make marks
on the ceiling in the places where
the screw holes are to be drilled,
and then drill the three holes.
2) Cut a hole (diameter:50mm) in the
ceiling for routing the cables.
3) Pass the power cable (B) and video
cable (A) from the camera unit
through the cable hole in the ceiling.
4) Align the three screw holes in the
camera unit (C) with the screw holes
in the ceiling, and then secure the
camera in place by tightening the
three tapping screws.
5) Use the supplied the four screws (E)
to secure the middle base (D) to the
bottom base (C)
6) Tighten the guide ring (G), then
adjustment the camera (F).
7) Attach the bubble (H) to the middle
base (D).
8) Attach the top cover (I) to the middle
base (D).
9) Use the supplied star-shaded
L-wrench to tighten the set screw on
the top cover.
Open Close
2
SPECIFICATIONS
VTD-MD7CH
Image Device
Resolution
Effective Pixels
Minimum Illumination
Included Lens
Day/Night
Noise Reduction
Synchronization
S/N Ratio
Video Output
Electronic Iris
Construction
Water Resistance
Power Source
Power Consumption
Operating condition
Dimensions
Weight
1/3” Sony® Super HAD II CCD w/Effio-E DSP (960H)
700TVL
976(H) x 494(V)
0.0003Lux @ F1.2
2.8mm (3.6, 6, 8, 12 and 16mm also available)
Auto
2D-DNR
Internal
More than 50dB
VBS 1Vpp +/-10%, 75ohm
1/60 ~ 1/100,000sec
Aluminum Housing with Polished Chrome Finish
IP-66
12VDC
100mA
14F ~ 122F (-10C ~ +50C) / 95% RH Max
3.15” x 1.69”/2.47” (80mm x 42.8mm/62.8mm)
14.11 Oz. (400g)

Termékspecifikációk

Márka: Vitek
Kategória: nincs kategorizálva
Modell: VTD-MD7CH

Szüksége van segítségre?

Ha segítségre van szüksége Vitek VTD-MD7CH, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók nincs kategorizálva Vitek

Vitek

Vitek VTC-C594DN Útmutató

8 Október 2024
Vitek

Vitek VTC-C01P Útmutató

27 Szeptember 2024
Vitek

Vitek VT-1205A-D4B Útmutató

17 Szeptember 2024
Vitek

Vitek VTC-BM3FP Útmutató

14 Szeptember 2024
Vitek

Vitek VTC-THB5RV Útmutató

14 Szeptember 2024
Vitek

Vitek VTD-VH412VP4 Útmutató

13 Szeptember 2024
Vitek

Vitek VTD-HOCRAZ Útmutató

11 Szeptember 2024

Útmutatók nincs kategorizálva

Legújabb útmutatók nincs kategorizálva

MOZA

MOZA SR-P Útmutató

10 Április 2025
CaterChef

CaterChef 445001 Útmutató

9 Április 2025
IFM

IFM E40581 Útmutató

9 Április 2025
Livn

Livn Bolt Útmutató

9 Április 2025
Livn

Livn Beats Útmutató

9 Április 2025
IFM

IFM O3R252 Útmutató

9 Április 2025