Használati útmutató Vivotek AP-FIC-010A-015

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Vivotek AP-FIC-010A-015 (48 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 11 ember találta hasznosnak és 3 felhasználó értékelte átlagosan 4.2 csillagra

VIVOTEK INC.

6F, No.192, Lien-Cheng Rd., Chung-Ho, New Taipei City, 235, Taiwan, R.O.C.

| | |T: +886-2-82455282F: +886-2-82455532E: sales@vivotek.com

VIVOTEK USA, INC.

2050 Ringwood Avenue, San Jose, CA 95131

| ||T: 408-773-8686 F: 408-773-8298 E: salesusa@vivotek.com

VIVOTEK Netherlands B.V.

Busplein 36, 1315KV, Almere, The Netherlands

| ||T: +31 (0)36 5389 149F:+31 (0)36 5389 111E: saleseurope@vivotek.com

Non-PoE Switch

Data INP+D OUT

100~240V AC

PoE

PWR

1. Use CAT5 or 5e UTP/STP cables.

2. AC input (100~240V/AC, 50~60Hz), for a max. consumption of 19W.

AP-FIC-010A(B)-015 FE PoE Injector

Quick Installation Guide

Model Description

AP-FIC-010A-015 FEStandard 802.3af 15.4W output

AP-FIC-010B-015 FEPassive 15.4W output

IMPORTANT:

INTRODUCTION

CONNECTION

* 1x PoE injector* 1x AC power cord

* 1x Quick Installation Guide

PACKAGE CONTENTS

All specications are subject to change without noice.

Copyright © 2014 VIVOTEK INC. All rights reserved.

Installation Steps:

1. Connect the included AC power cord to the injector. The Power LED (Green) should be lit.

2. Connect the Data IN port to a LAN switch using an Ethernet cable.

3. Connect the Power+Data OUT port to a powered device, i.e., IP camera, using another Ethernet cable. Make sure the

PoE LED (Yellow) is lit.

4. Check if the powered device (IP camera) is working properly. An IP camera may take up to 1 or 2 minutes to power up.

Termékspecifikációk