Használati útmutató Vivotek AW-GET-100A-120

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Vivotek AW-GET-100A-120 (1 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 11 ember találta hasznosnak.

VIVOTEK INC.

6F, No.192, Lien-Cheng Rd., Chung-Ho, New Taipei City, 235, Taiwan, R.O.C.

| | |T: +886-2-82455282F: +886-2-82455532E: sales@vivotek.com

VIVOTEK USA, INC.

2050 Ringwood Avenue, San Jose, CA 95131

| | |T: 408-773-8686 F: 408-773-8298 E: salesusa@vivotek.com

VIVOTEK Europe

Randstad 22-133, 1316BW Almere, The Netherlands

T E: +31(0)36-5298-434 : saleseurope@vivotek.com

- OR -- OR -

ConsoleNVRRouter / switch

Voltage regulator

POWER ONPower is on and normal.

OffPower is off.

LAN Green ONConnected in 1000Mbps.

Yellow OnConnected in 10/100Mbps.

OffNo connection.

FlashingData is being transmitted or received.

PoE Yellow ONPort is linked to a powered device.

OFFNo device is connected.

1. Install the PoE switch in a ventilated and dry place that is free of electromagnetic source, vibration, moisture, and dust.

2. Make sure the ventilation openings on the switch are not blocked.

3. Use CAT5 or 6 UTP/STP cables.

4. AC input (100~240V/AC, 50~60Hz), for a max. consumption of 120W.

AW-GET-100A-120 PoE Switch

Quick Installation Guide

The AW-GET-100A-120 is an 8 port 10/100/1000BaseT + 2 GbE SFP unmanaged PoE switch capable of feeding

15.4/30W (56V max. per port) power to Power over Ethernet (PoE) devices. The switch is capable of a total of 120 Watts

power budget.

IMPORTANT:

INTRODUCTION

LED DEFINITIONS

CONNECTION

* 1x PoE switch* 1x Quick Installation Guide

* 2x rack mount ears* 1x power cord (type by the shipped-to area)

PACKAGE CONTENTS

Rear PanelFront Panel

All specications are subject to change without noice.

Copyright © 2016 VIVOTEK INC. All rights reserved.

Use SFP, LC type transceiver with GbE transfer speed in Single mode (10km,30km,50km,80km) or Multi mode (0.5m or

2km) or Bidi (10km,30km,50km,80km).

Termékspecifikációk