Használati útmutató Vogel's PPA 904

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Vogel's PPA 904 (2 oldal) a Projektor tartozék kategóriában. Ezt az útmutatót 19 ember találta hasznosnak és 5 felhasználó értékelte átlagosan 4.5 csillagra

CONTROL UNIT FOR COMMAND OR CENTRALIZATION MOTOR

Control unit for one electromechanical motor, centralizaon or integra-

on dry contact command.

The control unit imputs is: local impulsive command (open and close), ge-

neral impulsive command (open and close), general priority command

(open and close) dead man switch.

Prevalence of general command (dead man switch) on other controls.

CONNECTION LAYOUTTECHNCIAL FEATURES

Power supply: 230 Vac ± 10% / 50 Hz

Corr. max output: 5 A cos 1,4 / 2 A cos 0,4φφ

Work Time: 120 seconds

Tens. output with: 230 Vac / 50 Hz

Dimensions without box: 46x46x37 mm

Terminal secon: ²2,5 mm

INPUTS AND OUTPUTS CONNECTION

1 = 230 Vac Neutral

2 = GND

3 = 230 Vac Phase

4 = COM x cont. neutral

5 = OPEN output

6 = COM x engines.

7 = CLOSE output.

8 9 -= COMMON commands.

10 = OPEN local command.

11 = CLOSE local command.

12 = OPEN general comm.

13 = CLOSE general comm.

14 = OPEN priority gen. comm.

15 = CLOSE priority gen. comm.

CONTROL UNIT CONNECTION

LOCAL COMMAND INPUT: allows the LOCAL com-

mand of the motor or system. The type of command

is IMPULSIVE and the contacts are voltagefree. To -

stop the engine give an inverse command respect to

the one in progress (ex: if OPEN = CLOSE). Timed

command. Mulple buons can be connected in

parallel. Recommended cable for connecon: 3x0.25

mm or 3x0.22 mm.

GENERAL COMMAND INPUT: allows the GENERAL com-

mand of the engine or system. The type of command is

IMPULSIVE and the contacts are voltagefree. To stop the -

engine give an inverse command respect to the one in

course (ex: if OPEN = CLOSE). Timed command. It’s possi-

ble to connect several buons in parallel with each other.

Cable recommended for connecon: 3x0.25 mm or

3x0.22 mm.

Termékspecifikációk