Használati útmutató Walrus Audio Melee

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Walrus Audio Melee (5 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 22 ember találta hasznosnak és 11.5 felhasználó értékelte átlagosan 4.7 csillagra

Oldal 1/5
Two of the most quintessential effects that helped
defined the shoegaze genre, reverb and distortion,
have been harnessed and woven together for an
eternity of ethereal distortion with The Melee: Wall
of Noise. The Melee unapologetically uses a joystick
to meld reverb and distortion together into one
massive blaze of sound.
VOLUME
The Vol” knob sets the overall output
volume of the pedal.
POWE R S TUF F
TONE
Control the tone of both the distortion and
reverb simultaneously. Left is the normal tone
setting, middle is the dark tone setting, and
right is the brightest tone setting.
DECAY
Control the decay time of the reverb. Left is
minimum decay, middle is medium decay,
right is max decay.
SECONDARY CONTROL
Hold down the bypass stomp switch and
adjust the amount of modulation applied to
the wet signal by moving the decay toggle.
Left position is no modulation, middle is
slight modulation at 33RPM, and right is high
modulation at 45RPM.
Got questions or need a repair?
Email help@walrusaudio.com to talk with a
real live human about your Walrus gear!
This product comes with a limited lifetime warranty. for more info.Click Here
9 volt DC, Center Neg.
200mA min*
*The use of an isolated power supply is
recommended for powering all Walrus Audio Pedals.
Daisy chain power supplies are not recommended.
Note: In Reverse Reverb (Blue LED), Decay
sets the amount of feedback instead of the
decay time.

Termékspecifikációk

Márka: Walrus Audio
Kategória: nincs kategorizálva
Modell: Melee

Szüksége van segítségre?

Ha segítségre van szüksége Walrus Audio Melee, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek