Használati útmutató Walrus Audio Meraki

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Walrus Audio Meraki (7 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 23 ember találta hasznosnak és 4 felhasználó értékelte átlagosan 4.3 csillagra

Got questions or need a repair?

Email help@walrusaudio.com to talk with a real human about your Walrus gear!

This product comes with a limited lifetime warranty.

Click Here for more info.

You are about to experience the Meraki. Cozy up and immerse yourself in true stereo

analog delay with eight MN3005 chips to create warm, rich repeats capable of 1200ms

of delay time with parallel, ping-pong and series delay modes. Independently control the

delay times and modulation of the left and right channels to create syncopated repeats or

keep them locked in to the same timing for classic delay sounds.

CONTROLS

Only use a 9 volt DC, Center Negative, 500mA to power the pedal.

The use of an isolated power supply is recommended for powering all Walrus Audio Pedals.

Daisy chain power supplies are not recommended.

Mix: Adjust the overall level of the repeats in both th

left and right channels. Full Wet/Dry Mix; 50/50 is ar

2 O’Clock. Note: This control adjusts the left and rig

simultaneously.

Feedback Left: Adjust the amount of repeats in the

channel, from a single repeat to full oscillation.

Feedback Right: Adjust the amount of repeats in the

channel, from a single repeat to full oscillation.

Mod (Mod Rate): Use to adjust the depth of modula

the repeats, creating a chorus/vibrato effect.

Hold the Bypass switch and use the Mod knob to ad

the mod rate.

•

Termékspecifikációk