Használati útmutató Wasp Delta 2040 Clay
Wasp
3D nyomtató
Delta 2040 Clay
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Wasp Delta 2040 Clay (37 oldal) a 3D nyomtató kategóriában. Ezt az útmutatót 13 ember találta hasznosnak és 7 felhasználó értékelte átlagosan 4.8 csillagra
Oldal 1/37
MANUAL OF USE AND MAINTENANCE
ORIGINAL INSTRUCTIONS
Discalaimer
IMPORTANT:
We kindly praise to read carefully and comprehend totally the content in this manual of Use and
Maintanance.
The missing acknowledgment of the manual can be cause of personal injury, worst quality results
or damages to the printer Delta WASP 2040 Clay. Always make sure that the personal using the 3D
printer knows and understands the content of the manual in order to the best results from DELTA
Delta WASP 2040 Clay.
No part of this publication may be reproduced, stored in a filing system or transmitted to third parties in any form or by any means, without
the Manufacturer having issued a prior written authorization. The Manufacturer reserves the right to make changes to its products at any
time and without notice in order to constantly increase the quality, therefore this publication may also be subject to future modifications and
updates.
Copyright 2018 CSP S.r.l. – All rights reserved
1 First edition 31/07/2019
Revision Reason for the revision Revision date
© CSP S.r.l.
3
Summary
0 Premises .......................................................................... 5
0.1. Aim of the instruction manual ............................................ 5
0.2. How the read the manual of instructions ...................... 6
0.3. Storage of the manual of instructions ........................... 6
0.4. Updating the manual of instructions .............................. 6
1 General information ....................................................... 7
1.1. Manufacturer identification data ......................................7
1.2. Indentification label ................................................................ 7
1.2.1. Position of the label on the printer .....................................8
1.3. Testing ..........................................................................................8
1.4. Warranty ......................................................................................8
1.5. Declaration of conformity ...................................................9
1.6. General safety warnings.................................................... 10
1.6.1. Personal protective equipment ........................................ 10
1.6.2. Operators for whom the manual is intended .............. 11
1.6.3. Residual risks ............................................................................11
1.6.4. Safety stickers ..........................................................................12
1.7. Glossary and pictograms .................................................. 13
1.7.1. Identification of operating personnel ............................13
1.7.2. Editorial pictograms ...............................................................14
2 Description of the printer .......................................... 15
2.1. Control panel .......................................................................... 16
2.2. Work area ................................................................................. 17
2.3. External area of the printer .............................................. 18
2.4. Technical data ........................................................................ 18
2.5. Noisiness .................................................................................. 19
2.6. Intended use of the printer .............................................. 19
2.7. Improper use of the printer .............................................. 19
3 Transport and handling ..............................................20
3.1. General warnings .................................................................. 20
3.1.1. Delivery of the printer ............................................................20
3.2. Unpackaging ........................................................................... 21
3.3. Content ..................................................................................... 21
3.4. Lifting and handling of the printer ................................. 21
4 Installation .......................................................................22
4.1. General warnings .................................................................. 22
4.1.1. Placement ................................................................................... 22
4.2. Electrical connection .......................................................... 23
5 Preparing to use the printer .....................................25
5.1. General warnings .................................................................. 25
5.2. User interface ......................................................................... 26
5.2.1. Main board ..................................................................................26
5.2.2. Menù print ...................................................................................27
5.2.3. PREPARE menu ........................................................................28
5.2.5. INFO menu .................................................................................. 29
5.3. First start .................................................................................. 29
6 First use of the printer ................................................30
6.1. General warnings .................................................................. 30
7 Ordinary and extraordinary maintanance ..........31
7.1. General warnings .................................................................. 31
7.1.1. Print bed cleaning ...................................................................33
7.2. Extraordinary maintenance ............................................. 34
7.3. Pulizia estrusore........................................................................
Termékspecifikációk
| Márka: | Wasp |
| Kategória: | 3D nyomtató |
| Modell: | Delta 2040 Clay |
Szüksége van segítségre?
Ha segítségre van szüksége Wasp Delta 2040 Clay, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók 3D nyomtató Wasp
3 Szeptember 2024
3 Szeptember 2024
Útmutatók 3D nyomtató
- 3D nyomtató Craftbot
- 3D nyomtató Zortrax
- 3D nyomtató Kodak
- 3D nyomtató Renkforce
- 3D nyomtató Artillery
- 3D nyomtató Anycubic
- 3D nyomtató Easy Threed
- 3D nyomtató MakerBot
- 3D nyomtató Creality
- 3D nyomtató XYZprinting
- 3D nyomtató Monoprice
- 3D nyomtató Leap Frog
- 3D nyomtató Exibel
- 3D nyomtató Weller
- 3D nyomtató PP3DP
Legújabb útmutatók 3D nyomtató
31 December 2025
27 December 2024
27 December 2024
27 December 2024
27 December 2024
12 December 2024
27 Szeptember 2024
14 Szeptember 2024
1 Szeptember 2024
1 Szeptember 2024