Használati útmutató Westinghouse PWSCSS

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Westinghouse PWSCSS (2 oldal) a Nagynyomású tisztító kategóriában. Ezt az útmutatót 27 ember találta hasznosnak és 7 felhasználó értékelte átlagosan 4.2 csillagra

 WARNING

Do not use for commercial use. User must read and understand the

operator’s manual for their pressure washer before using this accessory

to reduce the risk of injury. Before beginning any cleaning activity,

spray the pressure stream in a safe direction to make sure that all

accessories are connected properly in order to minimize the danger

of injury or property damage. Fits most pressure washers. Before

using this attachment, make sure it is compatible and is correctly

installed. Risk of uid injections. Do not point at people, pets, electrical

devices, or the unit itself. Wear eye protection designated to conform

with ANSI Z87.1. Before adding, replacing, or modifying accessories,

turn off the pressure washer, release the water pressure in the trigger

handle, and lock the trigger handle’s lock out (if one is provided with

your pressure washer). Use only with cold water and only outdoors.

Store the accessory indoors. Save these guidelines. Use them to train

other users and refer to them frequently. Give the user of the tool these

instructions as well.

PRODUCT SPECIFICATIONS

Connection1/4 in. Quick Connect Plug Inlet ..................................................

Width of Deck16.5 in. ....................................................................................

Maximum Pressure..................................................................up to 4000 psi

Minimum Pressure............................................................................2200 psi

Maximum Water Flow4.0 GPM ......................................................................

Minimum Water Flow2.0 GPM .......................................................................

Maximum Water Temperature ..............................................................194°F

NOTE:Consult your pressure washer’s operator manual for its maximum

operating water temperature.

APPLICATIONS

You may use this product for the purpose(s) listed below:

lCleaning decks, sidewalks, and driveways

INSTALLING THE SURFACE CLEANER

See Figure 1.

lIf necessary, remove the nozzle from the end of the lance.

lPull back the quick-connect collar and insert the inlet adapter. Push the

quick-connect collar forward to lock.

NOTE:Be sure the surface cleaner is securely locked into the lance before

use.

 WARNING

Only use the surface cleaner on at, horizontal surfaces. To reduce the

risk of injection or injury, never lift the surface cleaner from the cleaning

surface while operating the pressure washer.

USING THE SURFACE CLEANER

See Figure 2.

lPlace the surface cleaner on the horizontal surface being cleaned and start

the pressure washer.

lSqueeze the trigger and move slowly allowing the unit to clean the surface

NOTE:Swirling or striping in the cleaned surface indicates you may be

moving too quickly. If a slower pace doesn’t stop the condition, the surface

cleaner nozzles may be clogged. See to clean the Nozzle Maintenance

nozzles.

 WARNING

Avoid striking any raised obstacles while using the surface cleaner as

damage may occur to the unit. If contact occurs and a higher vibration

of the unit begins during use, release the trigger and discontinue use.

Continuing use could result in serious injury or damage to the unit.

NOZZLE MAINTENANCE

See Figure 3.

The surface cleaner comes assembled. The nozzles are approved for use

with pressure washers operating at 2200 to 4000 PSI with a maximum ow

rate of 4.0 GPM (2.0 GPM minimum).

A pulsing sensation felt while squeezing the trigger and/or a higher vibration

in the surface cleaner may be the result of a clogged or dirty nozzle.

FIG. 1

FIG. 2

A - Inlet adapter [adaptador de entrada, adaptateur d’entrée]

B - Quick connect coupler [acoplador de conexión rápida, coupleur à connexion

rapide]

A

B

Service Hotline: (855) 944-3571

777 Manor Park Drive, Columbus, OH 43228

and Westinghouse are trademarks of Westinghouse Electric Corporation.

Used under license by MWE Investments, LLC.

© 2023 MWE Investments, LLC All Rights Reserved.

lTurn off the pressure washer and shut off the water supply. Place unit on

the ground and pull the trigger to release the water pressure in the lance.

lPull back the quick-connect collar to disconnect the surface cleaner from

the lance.

lUse a nozzle cleaning tool or a ne needle to free any foreign materials

that are clogging or restricting the nozzle.

lUse a garden hose to back-ush the nozzle and force out the debris.

Never point the nozzle outlet at your face.NOTE:

lReconnect the surface cleaner to the lance.

lTurn on the water supply and start the pressure washer to resume cleaning.

REPLACING THE FILTER SCREEN

See Figure 4.

If the water still doesn’t ow freely after cleaning the deck nozzles, it may be

necessary to replace the lter screen. Replacement lter screens are available

by calling our Service Hotline at (855)944-3571.

lTurn off the pressure washer and shut off the water supply. Place unit on

the ground and pull the trigger to release the water pressure in the lance.

lDisconnect the surface cleaner from the lance.

lUsing a screwdriver or pair of tweezers, remove the retaining ring and lter

screen from the inlet plug.

lOnce the lter screen is removed from the inlet plug, replace it with a new

lter screen (not included).

lMake sure the lter screen is seated inside the inlet adapter and no longer

visible above the top of the adapter.

lReinstall the retaining ring and push into place until it is secure against the

lter screen.

REPLACEMENT PARTS

Replacement parts are available from our Service Hotline at (855) 944-3571.

Nozzle......................................................................................BSSC165A01

Filter ScreenBSSC165A02 ............................................................................

PWSCSS SURFACE CLEANER

FOR WESTINGHOUSE PRESSURE WASHERS UP TO 4000 PSI

FIG. 3

A

B

FIG. 4

A - Nozzle [boquilla,

buse]

B - Nozzle cleaner

[limpiador de

boquillas, nettoyeur

de buse]

BSSC165M01 11/2/23 (REV:01)

Termékspecifikációk