Használati útmutató Whirlpool UW8 F2C XLSB

Whirlpool mélyhűtő UW8 F2C XLSB

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Whirlpool UW8 F2C XLSB (2 oldal) a mélyhűtő kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/2
EN
Quick guide
THANK YOU FOR BUYING A WHIRLPOOL PRODUCT
In order to receive a more complete assistance, please
register your product on www . whirlpool . eu/ register
Before using the appliance carefully read the Safety
Instruction.
PRODUCT DESCRIPTION
FIRST TIME USE
Wait at least two hours, after the installation, before connecting the
appliance to the power supply.
Connect the appliance to the power supply and turn the thermostat
knob to switch on the appliance.
After turning the appliance on, you must wait for 4-6 hours for the
correct storage temperature to be reached for a normally lled
appliance. Position the antibacterial anti-odour lter in the fan as
demonstrated in the lter packaging (if available).
CONTROL PANEL
1. On/Stand By button
2. Temperature display
3. Fast freezer button
4. Stop Alarm button
5. Black out alarm
6. Eco Night function
7. 6th Sense Freeze control indicator
8. Freezer control indicator
1. 2. 3.
4.5.6.
8.7.
ON/STAND BY BUTTON
To put the product in Stand-by, press and hold for 3 seconds. All
the icons turn o except On/Standby indicator . To reactivate the
appliance press once (briey) this button.
TEMPERATURE SETTING BUTTON
The appliance is normally factory-set for operation at the
recommended temperature of -1C. The internal temperature can
be adjusted between -1C and -24°C, proceeding as follows: Press to
change the set point (°C). The storage temperature can be changed
by -1°C with each pressure of the button: the value changes cyclically
between -16°C and -24°C.
FAST FREEZER BUTTON
To activate/deactivate the Fast Freeze function simply press Fast Freeze
button (see the Instructions for Use). The Fast Freeze function switches
o automatically after 50 hours.
STOP ALARM BUTTON
Press in case of alarm.
BLACK OUT ALARM
Long Black-out Alarm indicator (see the Instructions for Use).
ECO NIGHT FUNCTION (NIGHT TIME RATE)
Press to activate/deactivate the Eco Night function. The Eco Night
function enables appliance energy consumption to be concentrated in
the reduced rate hours, generally at night (see the Instructions for Use).
6TH SENSE FREEZE CONTROL INDICATOR
6th
Sense Freeze Control is an advanced technology that reduces
freeze burns and food preserves its original quality and color.
FREEZER CONTROL BUTTON
Freeze Control is an advanced technology that reduces temperature
uctuations in the whole freezer compartment to minimum. To
activate/deactivate the Freeze Control function press for 3 seconds
the FREEZE CONTROL button. If the function is engaged and the user
modify the freezer temperature out of the working range, the function
is automatically switched o. In case of Fast freezing is engaged, the
function “Freeze control” is inhibited until the Fast Freezing function
switched o (see the Instructions for Use).
FREEZER COMPARTMENT AND FOOD STORAGE
Legend
FREEZER ZONE
All food items
TROUBLESHOOTING
What to do if... Possible reasons Solutions
The appliance doesn’t work. There may be an appliance power
supply problem.
Make sure:
there is not a power failure;
the plug is properly inserted in the power socket and the double-
pole switch (if present) is in the correct position (on);
the household electrical system protection devices function;
the power cable is not broken.
The inside light does not
work.
It may be necessary to replace the light
bulb.
Disconnect the appliance from the power supply and contact the
Technical Assistance Service if you need a replacement.
The internal temperature
of the compartments is not
cold enough.
The reasons could vary (see “Solution”)
column.
Check that:
the doors are closed properly;
the appliance is not installed near a heat source;
the temperature is appropriately set;
the circulation of air through the ventilation grilles on the base of
the appliance is not obstructed.
There is water on the
bottom of the refrigerator
compartment.
The defrost water drain is blocked. Clean the defrosting water drain (see section “Cleaning and
Maintenance").
Excessive amount of frost in
the freezer compartment.
The door to the freezer compartment is
not closed properly.
Check that there is nothing preventing the door from closing
properly.
Defrost the freezer compartment.
Make sure the appliance has been correctly installed.
The front edge of the
appliance that the door
gaskets seal against is hot.
This is not a problem. It prevents
condensation from forming.
A solution is not needed.
The temperature of the
refrigerator compartment is
too cold.
The set temperature is too cold.
A large amount of fresh food may
have been placed in the freezer
compartment.
Try to set a less cold temperature.
If fresh food has been put in the freezer compartment, wait until
the freezing has been completed.
Turn o the fan (if present) described in the paragraph “FAN.
19515448000
You can download the Safety Instructions, User Manual, Product Fiche and Energy data by:
Visiting our website docs . whirlpool . eu
Using QR Code
Alternatively, contact our After-sales Service (See phone number in the warranty booklet). When
contacting our After-sales Service, please state the codes provided on your product's identication
plate.

Termékspecifikációk

Márka: Whirlpool
Kategória: mélyhűtő
Modell: UW8 F2C XLSB

Szüksége van segítségre?

Ha segítségre van szüksége Whirlpool UW8 F2C XLSB, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók mélyhűtő Whirlpool

Útmutatók mélyhűtő

Legújabb útmutatók mélyhűtő

Miele

Miele F 2412 Vi Útmutató

10 Április 2025
Gram

Gram FSD 23 Útmutató

10 Április 2025
Midea

Midea MRC10M4CWW Útmutató

9 Április 2025
Swan

Swan SR11025GRN Útmutató

6 Április 2025
Summit

Summit ALFZ53CSS Útmutató

30 Március 2025
Accucold

Accucold FS407L Útmutató

29 Március 2025
LG

LG GC-164SQW Útmutató

22 Március 2025
Atag

Atag KU1090C Útmutató

19 Március 2025