Használati útmutató Whynter KS-1100
Whynter
konyhai mérleg
KS-1100
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Whynter KS-1100 (6 oldal) a konyhai mérleg kategóriában. Ezt az útmutatót 7 ember találta hasznosnak és 4 felhasználó értékelte átlagosan 4.9 csillagra
Oldal 1/6

WHYNTER Digital Wall Kitchen Scale
MODEL: KS-1100
Please read this instruction booklet completely before operating.
SPECIFICATIONS
Equipped with a high precision strain gauge sensor system
Capacity: 2kgx1g
Auto off & Manual off
Tare function
Over load / Low battery indicator
Electronic clock, countdown timer with alarm
POWER SUPPLY
1 x 3V CR2032 lithium battery (included)
When the LCD indicates “ , please open the battery cover at the bottom of the unit and
replace the battery with a new one.
ASSEMBLE AND INSTALL THE SCALE TO THE WALL
(Please choose a smooth and flat wall surface to install the scale.)
STEP 1: Use the paper card as reference to drill 4 holes on the wall. (Make sure that the
reference card is horizontal)
STEP 2: Drill in the screw knots(plug) into the 4 holes
STEP 3: Install the fixture plates to the holes and drill in the screws tightly to secure the

plates.
STEP 4: Pull the insulating tape out of the battery cover of the scale.
STEP 5: Insert the scale to the fixture plates and press downwards then push to the right.
OPERATION
STEP 1: Pull down the glass platform of the scale.
STEP 2: Press the “ON/TARE” button and the scale will display “HELO”, and then zero.
The scale is now ready for weighing.
STEP 3: Put the food / ingredient on the glass platform, the weight will appear on the
display.
STEP 4: After use, press the “MODE” button, the system return to clock mode.
STEP 5: Push glass platform upwards when not in use.

TARE FUNCTION
STEP 1: In the weighing mode, put the container on the glass platform, the display will
show the weight of container.
STEP 2: Press the “ON/TARE” button again, the display will show zero. Put the food/
ingredient into the container, the weight of the food/ ingredient will appear on the display.
TIME SETTING
Press the “MODE” button for a few seconds to turn on the time setting function.
Minute will flash on the display.
Press the “UNIT” button to setup the minute.
Press the “MODE” button again, hour will flash on the display.
Press the “UNIT” button to setup the hour.
After finish setting the time, press the “MODE” button to exit Time Setting.
Termékspecifikációk
Márka: | Whynter |
Kategória: | konyhai mérleg |
Modell: | KS-1100 |
Szüksége van segítségre?
Ha segítségre van szüksége Whynter KS-1100, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók konyhai mérleg Whynter
27 Augusztus 2024
Útmutatók konyhai mérleg
- konyhai mérleg Polti
- konyhai mérleg Ariete
- konyhai mérleg TFA
- konyhai mérleg Kuechenprofi
- konyhai mérleg Inotec
- konyhai mérleg Smeg
- konyhai mérleg Roadstar
- konyhai mérleg Bartscher
- konyhai mérleg Laica
- konyhai mérleg Vivax
- konyhai mérleg Brandt
- konyhai mérleg Pyrex
- konyhai mérleg Salter
- konyhai mérleg Brabantia
- konyhai mérleg Alessi
Legújabb útmutatók konyhai mérleg
3 Április 2025
31 Március 2025
30 Március 2025
27 Március 2025
17 Március 2025
16 Január 2025
15 Január 2025
14 Január 2025
14 Január 2025
14 Január 2025