Használati útmutató WMD Aperture

Olvassa el alább 📖 a magyar nyelvű használati útmutatót WMD Aperture (3 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 8 ember találta hasznosnak és 4.5 felhasználó értékelte átlagosan 4.3 csillagra

Oldal 1/3
2
Panel functions
Leds along the top indicate width and postion
Knobs
Frequency: Controls the center frequency of the band
Width: Controls the width of the band.
Freq CV: Attenuator for the CV input for precise
control over the Frequency of the filter.
HP Res: Controls the amount of resonance on the
High Pass side of the filter.
LP Res: Controls the amount of resonance on the
Low Pass side of the filter.
Input Level: Attenuates the input level. Will boost
signal at around 75%.
Feedback: Controls the amount of feedback for more
self oscillation and squelchy behavior.
Dry/Wet Mix: You know what this means ;)
Width CV: Attenuator for CV control over the width
of the filter.
Jacks
1V/ Oct: The aperture’s cutoff frequency will track
at 1V/oct. This is the input for that.
In LVL: Input for CV control over the input level attenuation.
Freq: CV input for control over the cuttoff frequency.
Width: CV input for control over the width of the band.
FDBK: CV input for control over the feedback amount.
Input: This is where your audio signal you want to filter goes.
Output: This is where the filtered audio signal comes out.
HPCV: CV input for independent control over the
cutoff frequency on the high pass side of the filter.
LPCV: CV input for independent control over the
cutoff frequency on the low pass side of the filter.
HP Res: CV input for control over the resonance on the
high pass side of the filter.
LP Res: CV input for control over the resonance on the
low pass side of the filter.

Termékspecifikációk

Márka: WMD
Kategória: nincs kategorizálva
Modell: Aperture

Szüksége van segítségre?

Ha segítségre van szüksége WMD Aperture, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek