Használati útmutató Wooden Camera 161700

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Wooden Camera 161700 (1 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 9 ember találta hasznosnak.

/ 1 PDF

Included:

(2) 1/4-20x3/8 socket cap

(2) 1/4-20x1 socket cap

3/16 allen wrench

CRUISER

© Wooden Camera, Inc. 2011-2013

1. Select DOVETAILSAFETY LATCH , locate and find

noted 1/4 HOLES as shown below

2. Select and locate of SIDE ASHOULDER PAD to find

1/4-20 HOLESnoted as shown below

3. With SIDE ASAFETY LATCHDOVETAIL facing , align

over SHOULDER PAD as shown below, select

, tighten with allen wrench1/4-20x3/8 SOCKETCAPS

4. Select HANDLE BAR1/4-20x1 SOCKET CAPS, and

1/4-20 HOLESCLAMPHANDLE BARlocate on , align

to DOVETAIL, tighten with allen wrench. If 1/4-20

THUMB screws are tight when inserting, loosen

SCREW.

5. Loosen THUMB SCREWHANDLE BAR to adjust to

desired position

SIDE A

NOTE: THUMB SCREWS can

be adjusted by pulling upward

and turning to desired position

PULL UP

SIDE B

HANDLE BAR

CLAMP

SIDE A

Termékspecifikációk