Használati útmutató Wooden Camera 175500

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Wooden Camera 175500 (3 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 16 ember találta hasznosnak.

/ 3 PDF

UNIVERSAL LENS SUPPORT (19mm/15mm Studio)

© Wooden Camera, Inc. 2011-2014

ROLLING Y BRACKET1/4-20

TIGHTENING

KNOB EXTENSIONS

SMALL & LARGE

19mm/15mm STUDIO

Included:

3/8-16

NOTE: LENS SUPPORT comes with factory installed

3/8-16 SCREW. To remove and install additional

adapters follow the steps below.

1. Select LENS SUPPORT, loosen thumscrew, locate and

loosen TIGHTENING KNOB3/8-16. to remove

2.To switch from to , loosen and 19mm15mm STUDIO

slide THUMBSCREW to desired position and re-tighten,

adjust the size by turning theROD CLAMP

.THUMBWHEELS

3. Choose desired adapter type. For example: select and

tighten Y BRACKET LARGE EXTENSIONto and install as

shown below.

4. Select LENS SUPPORTY BRACKET, insert , insert

, adjust left or right position and up TIGHTENING KNOB

or down to proper lens height, tighten THUMBSCREW

until vertical & horizontal position is secure.

THUMBSCREW THUMBWHEEL

4. Place LENS SUPPORTRODS on and tighten using

.THUMBWHEELS

5. Unlock THUMBSCREWLENS , center position under

FOOT and re-tighten .THUMBSCREW

RODS

THUMBWHEEL

LENS LENS FOOT

LARGE EXTENSION

Termékspecifikációk