Használati útmutató Wooden Camera 175400

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Wooden Camera 175400 (1 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 12 ember találta hasznosnak.

/ 1 PDF

NOTE: Lens Support comes with factory

installed 1/4-20 Screw. To remove and

install additional adapters follow the steps.

1. Select Lens Support, loosen thumbscrew,

locate and loosen Tightening Knob to

remove 1/4-20 Screw.

THUMBSCREW

LARGE EXTENSION

RODS

THUMBWHEEL

LENS

2. Choose desired adapter type. For

example: select and tighten Y Bracket

to Large Extension and install as

shown below.

3. Select Lens Support, insert Y Bracket,

insert Tightening Knob, adjust up or

down to proper lens height, tighten

Thumbscrew until vertical position

is secure.

4. Place Lens Support on Rods and tighten

using Thumbwheels.

5. Unlock Thumbscrew, center Y Bracket

position under Lens, adjust height and re-

tighten Thumbscrew.

TIGHTENING

KNOB

15mm LW

ROLLING Y BRACKET

3/8-16

EXTENSIONS

SMALL & LARGE

1/4-20

© Wooden Camera, Inc. 2011–2019

Termékspecifikációk