Használati útmutató WyreStorm AMP-001-010

WyreStorm Vevő AMP-001-010

Olvassa el alább 📖 a magyar nyelvű használati útmutatót WyreStorm AMP-001-010 (32 oldal) a Vevő kategóriában. Ezt az útmutatót 5 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/32
Technical Support: support@wyrestorm.com US: +1 866 677 0053 EU: +44 (0) 1793 230 343 1
Instruction Manual
Thank you for choosing this WyreStorm product.
Please read these instructions carefully before installing to avoid complications later.
Wyrestorm HDBaseTTM Class D Digital Audio Amplier / Receiver / Repeater
Part Number AMP-001-010
Technical Support: support@wyrestorm.com US: +1 866 677 0053 EU: +44 (0) 1793 230 343
2
Contents
1. Introduction
CONTENTS AND INTRODUCTION
AMP-001-010 Wyrestorm HDBaseTTM Class D Digital
Audio Amplier / Receiver / Extender
The Wyrestorm AMP-001-010 is a unique HDBaseT
TM
Class D digital audio amplier with receiving and repeating
functionality that fundamentally changes the way to approach
the design of multi-room audio-visual systems.
Fully cascadable (daisy-chained) over multiple 70m/230ft
distances up to 7 times using a single Cat5e cable to create
larger distributions. It also offers HDMI/HDBaseT reception
and pass-thru, 2.1 audio amplication with subwoofer and
stereo preouts for connection to an AVR and HDMI breakout
with bidirectional control of source/display from either
location via IR/RS232.... and so much more.
Feature rich and highly versatile, the AMP simplies,
combines and improves the relationship between HDMI,
HDBaseT and stereo audio for integrators by incorporating
3:1 audio switching from centralized AV sources and ARC or
local audio input.
Introduction
Features
Safety Precautions
Package Contents
Panel Descriptions
i. Front
ii. Rear
EDID Management
i. About EDID
ii. Before EDID adjustment
iii. EDID Pre-sets
RS232 Application Scenarios
i. Understanding RS232 Connection & Signals
ii. Zonal IR for Cascading Multiple Independently
Controlled AMP units
iii. Global IR for Cascading Multiple Collectively controlled
AMP units
iv. Hybrid IR for combination of Zonal and Global IR
control of multiple AMP units
v. RS232 Addressing
vi. Routable RS232 with Wyrestorm POH-enabled
HDBaseT Matrices - MX-PP-POH
vii. Residential RS232 HDBaseT Addressing example
viii. Example system topology showing multiple, dierently
addressed amps.
ix. Commercial RS232 HDBaseT Addressing example
Specications
1
2
3
4
5
6
Basic Operation
8
Remote Control Handset Operation
9
Application Scenarios and installation benets
i. Basic Centralized Source
ii. Extended Centralized Source
iii. Basic Matrix
iv. Extended Matrix
v. AMP-001-010 as Display Receiver
vi. AMP-001-010 as In-line Solution
vii. Central Conguration
11
12
Onscreen User Interface
10
Connection and Operation
i. Cabling Guide
ii. RJ45 Termination
iii. Initial Connection
iv. IR/RS232 Control Connection
v. Optional Device Connection
- Personal Device Audio Input
- Speaker Connection
- Subwoofer
- External Power Amplier
- Supported Speaker Types
vi. Interface Device
7
Maintenance
FAQ’s
Troubleshooting
Provided Service
Mail In Service
Installation Notes
Warranty
i. Warranty Limits and Exclusions
15
16
14
17
13
18
19
20
Technical Support: support@wyrestorm.com US: +1 866 677 0053 EU: +44 (0) 1793 230 343 3
FEATURES AND SAFETY PRECAUTIONS
Employing a switching topology, the low voltage, energy
efcient digital Class D amplication delivers power to the
speaker load exclusively with very little power wasted in
operation. This increase in efciency has the main benet
of lowering heat dissipation and reducing the size of the
amplier assembly. If properly executed, most D-class
ampliers typically have a much smaller form factor and a
lower BOM cost than comparable Class-A/AB/B units.
In terms of installation, it can be used locally in-room as a
display device, remotely in-rack or centrally at any point in-
line for one of the most exible and powerful applications of
HDBaseT technology to date.
The AMP-001-010 is the rst product of its kind and
represents Wyrestorm’s innate understanding and
appreciation of the AV installation by continually pushing the
boundaries of what is possible to offer innovative products
that add great value to any residential or commercial
application, whatever the size or budget.
www.wyrestorm.com
2. Features
• Combined HDBaseT Repeater, Receiver and Class D Amplier – all in
one.
• Compact and easy to install & use with single Cat5e/6 cabling –
applies the same basic integration principles for residential, light or
major commercial projects.
• Flexible and versatile – multitudes of application scenarios from basic
extender to complex volume digital AV distribution installed at any
point during a cable run.
• HDBaseT Input and pass-thru with HDBaseT Output.
• 3:1 Audio Switcher/Receiver – Audio from centralized source via
HDBaseT Transmitter or Matrix Device, Audio Return Channel (ARC)
or Local Audio Input via 3.5mm.
• AMP used centrally with AV source, In-line near speakers, wall
mounted near data connections or locally at display location.
• 70m/230ft transmission distance between device and AMP > then
another 70m/230ft to next AMP.
• Fully cascadable up to 7 times from single transmitting device (Matrix
or HDBaseT transmitter).
• HDMI output for direct connection of HD display either in-line to each
AMP connected or at the end of the run.
• 2.1 stereo audio at 25w per channel - amplier capability to drive
4, 6 & 8 Ohm speaker loads.
• High quality preamplier adjustment for tone/volume/sub/mute
control.
• Variable Analog line level outputs.
• Analog (RCA) Subwoofer output.
• Stereo speaker amplied outputs with left/right spring terminal
connections.
• Bidirectional control of source and display via IR or RS232 (IR control
signal passed within HDMI transmission).
• Options range from basic control of devices using IR TX and RX ports
to fully integrated control via leading control systems using RS232.
• Commands (Tx, Rx, Gnd) sent with HD Audio & V ideo contained
within a single Cat5e/6
• AMPs addressable via RS23 • RS232 Port for rmware update or
RS232 control signal transmission.
• EDID management and pre-sets via DIP switch.
• LED indication – power status, audio source selection (HDBaseT,
Local or ARC).
• HDMI v1.4 features supported.
• HDCP compliant.
• Internal ESD protection.
• Compact size for exible integration location.
• Mounting brackets supplied.
.
Part Number AMP-001-010
3. Safety Precautions
1. Do not expose this apparatus to rain, moisture,
sprays, drips or splashes and ensure that no
objects containing liquids are placed on the
apparatus, including cups, glasses and vases.
2. Do not place this unit in a conned space such as
enclosed shelving, cabinets or bookshelves.
Ensure the unit is adequately ventilated.
3. To prevent the risk of electric shock or re hazard
due to overheating, do not cover the unit or
obstruct ventilation openings with material,
newspaper, cardboard or anything that may restrict
airow into the unit.
4. Do not install near external heat sources such as
radiators, heat registers, boilers or any device that
produces heat such as ampliers or computers and
do not place near sources of naked ame.
5. Unplug apparatus from power supply during
lightening storms or when unused for long periods
of time.
6. Protect the power cable from being walked on,
pinched or restricted in any way, especially at plug
connections.
7. Only use attachments/accessories specied by the
manufacturer.
8. Units contain non-servicable parts - Refer all
servicing to qualied service personnel.
WARNING
To reduce the risk of re, electric shock
or product damage:
• Simplied ports Input: HDMI Output: integrated RJ45
connectors for a single Cat5e/6/7 UTP cable to each display
point for ease of installation.
USB to 5V Cable
CAB-USB-5V

Termékspecifikációk

Márka: WyreStorm
Kategória: Vevő
Modell: AMP-001-010

Szüksége van segítségre?

Ha segítségre van szüksége WyreStorm AMP-001-010, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók Vevő WyreStorm

WyreStorm

WyreStorm EX-SW-0301-H2 Útmutató

25 Augusztus 2024
WyreStorm

WyreStorm SW-515-RX Útmutató

25 Augusztus 2024
WyreStorm

WyreStorm EXF-300-H2 Útmutató

25 Augusztus 2024
WyreStorm

WyreStorm AMP-001-010 Útmutató

25 Augusztus 2024
WyreStorm

WyreStorm EX-70-H2 Útmutató

25 Augusztus 2024
WyreStorm

WyreStorm EX-70-H2X Útmutató

25 Augusztus 2024

Útmutatók Vevő

Legújabb útmutatók Vevő

Yamaha

Yamaha Aventage RX-A4A Útmutató

9 Április 2025
Yamaha

Yamaha Aventage RX-A8A Útmutató

9 Április 2025
DJI

DJI D-RTK 3 Útmutató

5 Április 2025
Phonocar

Phonocar PH544 Útmutató

5 Április 2025
QSC

QSC SPA-Qf 60x2 Útmutató

2 Április 2025
Harper

Harper HDT2-5010 Útmutató

2 Április 2025
Harper

Harper HDT2-2010 Útmutató

2 Április 2025
Alpine

Alpine MRX-F65 Útmutató

31 Március 2025
Streacom

Streacom TL1 Útmutató

31 Március 2025
Pro-Ject

Pro-Ject Stereo Box DS Útmutató

30 Március 2025