Használati útmutató WyreStorm NHD-200-TX

Olvassa el alább 📖 a magyar nyelvű használati útmutatót WyreStorm NHD-200-TX (4 oldal) a Digitális dekóderek kategóriában. Ezt az útmutatót 22 ember találta hasznosnak és 11.5 felhasználó értékelte átlagosan 4.4 csillagra

Oldal 1/4
Wyrestorm NetworkHD™ 200-Series HD Over IP
Encoder and Decoders for video wall
NHD-200 Series
WyreStorm® NetworkHD 200 is our agship H.264 HD over IP distribution platform. With its simple system conguration and
powerful video wall functionality it is the best all round solution for commercial AV installs. Enabling the distribution of multiple
video formats over a dedicated IP network switch for commercial AV applications.
NetworkHD 200 series facilitates the transmission of an HDMI, DVI, Component & VGA signals (including Full HD 1080p video with
2.1 audio) to any number of HDMI displays over standard Ethernet (Cat5e/6) infrastructure. The NHD-200-RX enables the display
of a single image on a display whilst the NHD-210-RX decoder adds video wall playback to the system.
WYRESTORM PRODUCT SPECIFICATION SHEET
Highly scalable, visually lossless HD over IP solution using the most ecient compression
technology to allow for very large commercial AV deployments
Powerful video wall functionality (NHD-210-RX only) up to 4 x 4 displays.
Multi-format DVI-I input selectable to HDMI, DVI, Component, VGA & Composite input
Plug and Play setup with automatic networking conguration and auto discovery of components
Quick SyncTM technology for virtually instantaneous, seamless switching
CEC One-Touch Play & Standby or RS232 control of connected displays
Key Features:
Additional Features & Benefits:
Supports video previewing on a PC or third party device.
NetworkHD 100 outputs simultaneous IP streams. One full
resolution for the NHD-100-RX. The other small one supports
resolutions of 352 x 288 @ 5Hz to easily preview a video from
the encoder on a PC or Mac
Use with the new NHD-000-CTL controller for simple
conguration and control via the LAN, as well as for allowing
control from third party control system such as AMX, Crestron,
Control4, RTI & WyreStormTM Enado.
Supports PoE to enable remote powering from POE network
switches, eliminating the need for a nearby power outlet
Full PC control suite available free of charge at wyrestorm.com
Supports HDCP
Audio Breakout on both Encoder & Decoder
Congurable encoding bit rate up to 40 Mbps
NHD-000-CTL
1 x NHD-000-CTL Main Unit
1 x Power Adapter (12V 1A DC)
1 x Phoenix Conn.
(Male, 3.5 mm, 3 pins)
2 x Mounting Brackets
5 x IP labels
NHD-200-TX
1 x NHD-200-TX Main Unit
1 x Power Adapter (12V 1A DC)
1 x Detachable Plug
1 x HDMI to DVI Converter
2 x Phoenix Conn.
(Male, 3.5 mm, 3 pins)
2 x Mounting Brackets
NHD-200-RX
1 x NHD-200-RX Main Unit
1 x Power Adapter (12V 1A DC)
1 x Detachable Plug
3 x Phoenix Conn.
(Male, 3.5 mm, 3 pins)
2 x Mounting Brackets
NHD-210-RX
1 x NHD-210-RX Main Unit
1 x Power Adapter (12V 1A DC)
1 x Detachable Plug
3 x Phoenix Conn.
(Male, 3.5 mm, 3 pins)
2 x Mounting Brackets
in the box
US OFFICE:
TEL: +1 518-289-1293
EMEA OFFICE:
TEL: + 44 (0) 1793 230 343

Termékspecifikációk

Márka: WyreStorm
Kategória: Digitális dekóderek
Modell: NHD-200-TX

Szüksége van segítségre?

Ha segítségre van szüksége WyreStorm NHD-200-TX, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek