Használati útmutató ZKTeco uFace401
ZKTeco
nincs kategorizálva
uFace401
Olvassa el alább 📖 a magyar nyelvű használati útmutatót ZKTeco uFace401 (1 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 15 ember találta hasznosnak és 8 felhasználó értékelte átlagosan 5.0 csillagra
Oldal 1/1
1. Overview
5.
Quick Flows
1) Recommended Standing Position
2) Registration
a. Recommended Registration and Verication Position
b. Factors Aecting the Preciseness of Verication
b. View records on computer (Main Menu USB Manager Download Attendance Data)
a. View records in the device (Main Menu Attendance Search Attendance Records)
b. Shortcut Key Mappings (Main Menu Personalize Shortcut Key Mappings)
a. Date Time (Main Menu Date Time) System
2) Locations Unrecommended
Recommended Procedures (as shown in the left image):
During registration and verication procedures,
the position of device should not be changed to
prevent reduction in verication preciseness. If
it is necessary to move the device, its vertical
height should not be changed.
1) Put the mounting template sticker onto the wall, and drill holes according to the mounting paper.
2) Fix the back plate onto the wall using wall mounting screws.
3) Insert the device into back plate.
4) Use security screw to fasten the device to back plate.
For user heights between 1.5m to 1.8m, it is recommended to
install the device at 1.15m above ground (may be modied
according to user average height).
b. During verification, it is required to show your face in the center of the screen
and fit your face into the green frame in the screen.
Non-identical registration and verication gestures
Non-identical registration and verication
distances from device
Non-identical registration and verication heights
a. Face Verication Mode
To avoid deleting data by misoperation, you can backup data to local or usb disk at any time.
Enter Main Menu Data Management Backup Data, select the saving type and data
type to backup.
b. Fingerprint Verication Mode
c. Password Verication Mode
Left Side
Front
Back
a. During registration, it is required to adjust your upper body to t your
eyes into the green frame on the screen.
8. Troubleshootings
7. Other Settings
6. Backup Data
1. The face cannot be recognized by the device in verication.
Solutions
a. Check if your facial expression, standing posture and distance during verication are the same
with that in enrollment.
b. Check if the device is under direct sunlight or near the windows.
2. Verication fails as user wears glasses during verication but not in face enrollment.
Solution
You can enroll your face wearing glasses in the rst or second time of face capturing, since the
device supports 3 times of capturing face templates.
3. The device makes a misjudgment in verication.
Solution
There is a certain probability of misjudgment. You can re-enroll your face.
RF Card & Facial Terminal
Fingerprint & Facial Terminal
2.Installation Environment
3. Installation Steps
4. Cautions on Using Face Recognition Device
Touch Screen
Fingerprint
Sensor
Camera
Battery Slot
TCP/IP
Power
RS485/232
Door Sensor
Bell
Tamper Alarm Button
Power Key
Reset key
USB Interface
Card Reader
Tamper Alarm Button: Once the tamper alarm button is released, the system make will a
warning sound and the will be displayed in the status bar of the initial interface. There
will be no alarm signal while the button is pressed.
3) Verication (1:1 verication mode for example）4) Viewing Attendance Records
Click to enter 1:1 verication mode on initial interface.
Enter User ID and press [OK]. When multi-verication mode is registered, please
choose the verify mode as the gure above:
password, ngerprint and face.
567
123
b. Enroll Normal Users (same steps with enrolling adminnistrator except the “User Role” option.)
a. Enroll Administrator (Main Menu
User Management New User)
2) Communication Settings (Main Menu Communication)
User ID: Enroll user ID; it supports 1-9 digits of numbers.
Name: Enroll name; it supports 1-12 digits of any
characters.
Use Role: Select the user role between Normal User and
Super Admin.
Fingerprint : Enroll a ngerprint or ngerprints.★
Face: Enroll a face according to the prompts of screen
and voice.
Badge Number : Enroll a badge by swiping a badge.★
Password: Enroll the password; it supports 1-9 digits of
numbers.
User Photo: Enroll the user photo which will be
displayed after verication .
Access Control Role: Set the Access Conrtol parameters
of a user.
Ethernet: The device can communicate with PC via the
Enthernet parameters.
Serial Comm: The device can communicate with PC via
the serial port according to the parameters you set.
PC Connection: Set the password and device ID so that
you can connect the device with software in PC.
Cellular Data Network : When the device is applied on ★
a dial-up network, ensure that the device is within the
coverage of the mobile network signals (GPRS/3G).
ADMS Setting : Settings used for connecting with ★
ADMS server.
Wi-Fi Setting : The device provides a Wi-Fi module, ★
which can be built in the device mould or externally
connected, to enable data transmission via Wi-Fi and
establish a wireless network environment.
Wiegand Setup: Set wiegand-out parameters.
Access Control Options: Including Door Lock Delay,
Door Sensor Delay, Door Sensor Type, Door Alarm
Delay, Retry Times to Alarm, NC / NO Time Period etc.
Time Schedule: Schedule Doors’ opening time, 50 time
zones are available to dene.
Holidays: Set special time zones for holidays.
Access Groups: Set to manage employees in groups.
Combined Verication: Set various groups into a
combined access group to achieve multi-verication.
Duress Options: Set duress function options.
4
Enter the user ID to search. Select the time range for attendance record query.
Tap the record in green to view its details. The above gure shows the details of this record.
Insert the usb disk correctly, download the
attendance data to the disk, then upload that
from the disk to your computer. The
downloaded data is named ”Device Serial
Number.dat”, you can open and view it.
Select the content to be backed up.
Shortcut keys can be dened as punch state keys or menu function key. When the device is on
the main interface, pressing the set shortcut key will display the attendance state or enter the
menu operation interface.
Tap the shortcut key to be set Tap the main interface to show the shortcut menu.
Set the date, time and time format for the device.
Access Control Setting (Main Menu Access Control):
NOTE: Not all products have the function with , the real product shall prevail.★
1.15m
F1/F4
F2/F5
F3/F6
1) Recommended Installation Location
3m
1.15m
3m
1.15m
0.5m
1.15m
1.15m
0.5m0.5m
1.15m
1.15m
1.15m
1.15m
1.15m
1.15m
1.15m
0.5m
0.5m
0.5m0.5m0.5m
0.3m0.5m
Non-identical registration and verication
distances from device
Enroll Administrator and Users
Communication Settings
Punch/Verify
View Records
1) Enroll Administrator and Users
Quick Start Guide
4.3-inch Touch Screen & Facial Attendance Terminal
Direct sunligt Direct sunligt Indirect sunlight Too close to
in outdoors through window through window light xtures
Enroll Verify
Enroll Verify
Enroll Verify
Enroll Verify Enroll Verify
Install the device indoors , and 6.5 feet (2m) from
light xtures. It is not recommended to install it
near windows or outdoors.
1.15m
Version: 1 1.
Termékspecifikációk
| Márka: | ZKTeco |
| Kategória: | nincs kategorizálva |
| Modell: | uFace401 |
Szüksége van segítségre?
Ha segítségre van szüksége ZKTeco uFace401, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók nincs kategorizálva ZKTeco
3 Szeptember 2024
1 Szeptember 2024
15 Augusztus 2024
14 Augusztus 2024
14 Augusztus 2024
13 Augusztus 2024
13 Augusztus 2024
12 Augusztus 2024
12 Augusztus 2024
12 Augusztus 2024
Útmutatók nincs kategorizálva
- nincs kategorizálva Maximum
- nincs kategorizálva Impact
- nincs kategorizálva Infantino
- nincs kategorizálva Tvilum
- nincs kategorizálva Optoma
- nincs kategorizálva Peugeot
- nincs kategorizálva Kraftmax
- nincs kategorizálva Futaba
- nincs kategorizálva IP-COM
- nincs kategorizálva Edge
- nincs kategorizálva Graflex
- nincs kategorizálva Milan
- nincs kategorizálva NEC
- nincs kategorizálva Tanaka
- nincs kategorizálva Carlsbro
Legújabb útmutatók nincs kategorizálva
10 Április 2025
10 Április 2025
10 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025