Használati útmutató ZyXEL P-871M

ZyXEL router P-871M

Olvassa el alább 📖 a magyar nyelvű használati útmutatót ZyXEL P-871M (20 oldal) a router kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/20
Copyright © 2009. All rights reserved
P-871M
VDSL Modem
User’s Guide
Version ME1
11/2009
Edition 2
DEFAULT LOGIN
Password 1234
Console Port Speed 38400 bps
P-871M User’s Guide
2
Overview
The P-871M is a VDSL modem in CPE (Customer Premises
Equipment) mode and can also act as CO (Central Office)
equipment. CO equipment is where home and office phone
lines terminate and connects to a much larger switching
system. In the following example, you can build up a VDSL
bridge connection between two P-871Ms.
This guide covers:
Overview, page 2
Hardware Connections, page 3
CLI Commands Configuration, page 6
Firmware Upgrade, page 9
Wall-mounting Instructions, page 12
3
P-871M User’s Guide
1 Hardware Connections
You can set the P-871M to work in either CO mode or CPE
mode. Follow the procedure below to complete the hardware
connections.
1.1 CO Mode
1Set the CO/CPE switch on the rear panel to the CO side.
2Use the included console cable to connect the CONSOLE
port to your computer’s COM port for configuration.
3Use the included yellow Ethernet cable to connect the
ETHERNET port to your network device, such as a switch.
4Over ISDN: Use the included gray cable with a RJ-45
connector to connect the DSL port to another P-871M in
CPE mode.
Over POTS: Use the included gray cable with a RJ-11
connector to connect the DSL port to another P-871M in
CPE mode.
3
1
24
5
6
CO
CPE

Termékspecifikációk

Márka: ZyXEL
Kategória: router
Modell: P-871M

Szüksége van segítségre?

Ha segítségre van szüksége ZyXEL P-871M, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók router ZyXEL

Útmutatók router

Legújabb útmutatók router