Használati útmutató 4ms Rotating Clock Divider

4ms nincs kategorizálva Rotating Clock Divider

Olvassa el alább 📖 a magyar nyelvű használati útmutatót 4ms Rotating Clock Divider (8 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 9 ember találta hasznosnak és 5 felhasználó értékelte átlagosan 4.4 csillagra

Oldal 1/8
Rotating Clock Divider
Eurorack Module User Manual (updated Sept 2015)
PCB version 1.2 (released November 2014)
Firmware version 1.1 (released April 2012)
4ms Pedals
Features
Divide-by-1 to Divide-by-64, on 8 output jacks
CV Rotate jack to shift divide-by amount on all jacks
CV Reset to reset/re-sync all jacks
Jumpers or optional break-out panel:
Select auto-reset
Select "Spread" mode
Select maximum divide-by amount (8/16/32/64)
Gate or Trigger outputs
Count-up or Count-down mode
ISP header
Connects to in-circuit programmer such as AVR ISP MKII for reprogramming code
Maximum input frequency 3kHz
LED dimmer trimpot allows you to set a custom LED brightness
Bus Clock support (slave only). Clock can be taken from the Gate pins on the power
header.
5V Select jumper allows you to power the RCD from either the 12V rail or the 5V rail.
4 HP Eurorack module
5VSEL Jumper set to INT:
33mA maximum power draw from +12V rail
0mA max on the +5V rail
4mA maximum power draw on the -12V rail
5VSEL Jumper set to EXT:
19mA maximum power draw on the +12V rail
14mA max on the +5V rail
4mA maximum power draw on the -12V rail
Jacks
Clock Input (3.5V to 15V clock, rising edge triggered)
CV Rotate (0V to +5V input)
CV Reset (3.5V to 15V trigger)
Divided Clock Outputs (8 jacks):
Divide-by (1+R)
Divide-by (2+R)
Divide-by (3+R)
Divide-by (4+R)
Divide-by (5+R)
Divide-by (6+R)
Divide-by (7+R)
Divide-by (8+R)
..where R is the CV Rotation (0 to 63)

Termékspecifikációk

Márka: 4ms
Kategória: nincs kategorizálva
Modell: Rotating Clock Divider

Szüksége van segítségre?

Ha segítségre van szüksége 4ms Rotating Clock Divider, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek