Használati útmutató AMX HPX-600-NA

Olvassa el alább 📖 a magyar nyelvű használati útmutatót AMX HPX-600-NA (24 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 27 ember találta hasznosnak és 14 felhasználó értékelte átlagosan 4.8 csillagra

QUICK START GUIDE

HPX--600/900/1200NA HydraPort 6, 9, 12 Module Connection Ports

Overview

The HPX-- --600/900/1200NAfamily of HydraPort Connection Ports (AMXFG560

xyz-NA) is built to accommodate the diverse connection needs of conference and

meeting room -- visitors. The HPX600/900/1200NAare designed to be mounted

into a horizontal surface such as a conference room table or lectern in order to

providudio/e connectivity for power, anetworking, video and control.

Specific connectivity is accomplished by populating the HydraPort Base

Assembly with various modules. Each base includes a single US/NAM power

outlet module already installed.

FIG. 1 AMX HydraPort Base Assembly

AMX offers six(6) versions o f the Hydraport Base Assembly for North America:

H--PX600/900/1200NA HYDRAPORT BASE ASSEMBLIES

HPX-- 600BLNA

AMX--FG56001B- NA

6M Capacity, Black

HPX-- 600SLNA

AMX--FG56001S- NA

6M Capacity, Silver

HPX-- 900BLNA

AMX--FG56002B- NA

9 M Capacity, Black

HPX-- 900SLNA

AMX--FG56002S- NA

9M Capacity, Silver

HPX-- 1200BLNA

AMX--FG56003B- NA

12M Capacity, Black

HPX-- 1200SLNA

AMX--FG56003S- NA

12M Capacity, Silver

ATTENTIONwith : Each base assembly comes one (1) US/NAM(Type A/B)

power outlet, -preinstalled. nly one (1) power outlet may be In North America, o

installed in any Hydraport Base Assembly.

ATTENTION: Only a professional, AMX-qualified installer should perform this

installation. Installation must conform to all local codes. This product may not

be installed by the end- user.

Accessories

Hydraport Base assemblies come with the following accessories:

•Two (2) Table adhesiveS”-/ pacers (for use in tables 0.50.75" thick) w

•Eight (8) Cable Routing Clips

Compatible HydraPort Modules

Please refer to the Architectural Connectivitys product pageat AMX.com for a

complete listing of compatible HydraPort Connection Modules

Installation of the HydraPort Base Assembly

The following sections describe the preparation, installation and setup of the

HydraPort Base Assembly. A typical installation will include several various

HydraPort modules.

Each HydraPort module has specific instructions for terminating their

connections. Refer to each miodule’s nstallation guide during the installation of

the HydraPort system.

Note: Read these instructions in their entirety before beginning the installation. The

installation requires specific steps to be performed in specific order.

CAUTION: This installation requires specific woodworking skills. This installation

should be performed by an experienced person, comfortable with these types of

woodworking operations. Improper installation may result in damage to the

mounting surface. AMX isnot responsible for damage caused by improper

installation.

1) Select a Suitable Location for the HydraPort Base Assembly

The following table indicates the space requirements for installing the unit:

M ODEL

H EIGHT

WIDTH

LENGTH

HPX-- 600BLNA

Base Height:

4.37”(111 mm)

Wi

th RCMs:

11.3”(287 mm)

5.43”

(138 mm)

8.19” (208 mm)

HPX-- 600SLNA

HPX-- 900BLNA

11.14” (283 mm)

HPX-- 900SLNA

HPX-- 1200BLNA

14.09” (358 mm)

HPX-- 1200SLNA

The HydraPort system requires a mounting surface from 0.5” (13mm) to 2”

(51mm) thick. T. hin surfaces may require use of included spacers

Note: Care should also be taken to ensure that the HydraPort system does not interfere with

the normal use of the work space. For example, on a table or work surface, ensure that the

system does not interfere with the user's legs when they are seated at the table.

2) iCut the Hole n the Mounting Surface

The Hydraport Base Assembly a paper template includes to locate the ideal

installation spot, and to mark the perimeter for cutting the surface. The following

table provides the hole cutout dimensions for the HydraPort Base Assembly:

M ODEL

WIDTH

LENGTH

HPX-- 600BLNA

4.84”

(123 mm)

7.64” (194 mm)

HPX-- 600SLNA

HPX-- 900BLNA

10.59” (269 mm)

HPX-- 900SLNA

HPX-- 1200BLNA

13.54” (344 mm)

HPX-- 1200SLNA

1.Use the template or measure the tabletop or other mounting surface to

locate the desired position of the HydraPort Base Assembly.

2.Use the cutout template to mark the edges of the cutout.

Note: Very little clearance exists between the HydraPort Base Assembly and the

hole cutout in the mounting surface.

Tips & Considerations:

•Align the cutout carefully with the edges or other features of the mounting surface.

If the cutout is misaligned, the installed unit will be misaligned.

•Take care to ensure that the top of the mounting surface is not damaged beyond the

width of the trim bezel as the cutout is made.

•Use an appropriate drill & bit to make a starting hole within the boundary of the

cutout. Use an appropriate saw, such as a jigsawto finish the cutout.

•Make sure cutting tool used is appropriate for the material to be cut and will not tear

or chip the top surface.

•Note that the process of making the cutout will create substantial dust and prepare

the environment appropriately.

3)Prepare the Terminations

Some HydraPort modules require some type of backside termination.

Note: Refer to the installation guide for each module to determine the required backside

termination.

FIG. 2 Inserting the Modules to HydraPort Base Assembly

Termékspecifikációk