Használati útmutató AMX MXD-430

Olvassa el alább 📖 a magyar nyelvű használati útmutatót AMX MXD-430 (2 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 12 ember találta hasznosnak és 3 felhasználó értékelte átlagosan 4.3 csillagra

QUICK START GUIDE

MXD-430 4.3" Modero X® Series Wall/Flush Mount Touch Panel

Overview

The MXD-430 4.3” Modero X Series Wall/Flush Mount Touch Panel (FG5968-15)

features edge-to-edge capacitive touch glass with multi-touch capabilities as well

as advanced technology empowering users to operate AV equipment seamlessly,

while providing the ultimate in audio and video quality. The distinctive appearance

will complement even the most sophisticated meeting facilities and homes.

Product Specifications

Connector Locations

USB peripherals (mouse, keyboard, etc.) may be connected to either of the two

USB ports on the rear of the device (see FIG.1). The connectors are accessible

via the Access Slot shown in FIG.2. and FIG.3.

Updates to the device’s firmware can also made via the USB ports.

Power via PoE

Power for the MXD-430 is supplied via Power Over Ethernet (PoE), utilizing an

AMX-certified, capacitive touch-compliant PoE injector such as the PS-POE-AF-

TC High Power PoE Injector (FG423-83) or other approved AMX PoE power

source.

The incoming Ethernet cable should be connected to the RJ45 port on the MXD-

430 (FIG. 2).

Installing the MXD-430 Into a Wall

The MXD-430 comes with a clear plastic Backbox (designed to attach the panel to

most standard wall materials. This Backbox has two locking tabs (one on each

side) to help lock the Backbox to the wall.

These locking tabs are only extended AFTER the Backbox is inserted into the wall

(FIG.3)..

•When installing the Backbox, make sure that the assembly is in the correct

position and in the correct place. Once the locking tabs are extended and

locked into place, removing the Backbox may be difficult without having

access to the back of the wall or causing damage to the wall.

•In order to ensure a stable installation of the MXD-430, the thickness of the

wall material must be a minimum of .50 inches (1.27cm) and a maximum of

.875 inches (2.22cm). The mounting surface should also be smooth and flat.

Installing the Backbox

For best results, use the included Installation Template (68-5968-05) to ensure

proper placement.

WARNING: Using the Installation Template to select the final placement of the

Backbox is highly recommended. The outside edges of the template are the same

dimensions as the touch panel, which allows you to troubleshoot possible conflicts

with wall edges, doors, and other potential obstacles.

1.Prepare the area by removing any screws or nails from the drywall before

beginning the cutout process.

2.After ensuring proper placement, cut out the mounting surface, using the

(included) Installation Template as a guide.

CAUTION: Making sure the actual cutout opening is slightly smaller than the

provided dimensions is highly recommended. This action provides a margin

for error if the opening needs to be expanded. Too little wall material removed

is always better than too much.

3.Thread the incoming Ethernet cable through the surface opening.

Leave enough slack in the wiring to accommodate any re-positioning of the

panel.

FIG. 1 MXD-430

MXD-430 SPECIFICATIONS

Dimensions (HWD)4 7/8" x 3 1/4" x 2 3/8" (120 mm x 82 mm x 61 mm)

Weight0.75 lbs (.34 Kg)

Power Consumption•Full-On: 6.5W

•Standby: 4.2W

•Shutdown: 1.9W

•Start-Up Inrush Current: Not applicable due to PoE

standard

External Power

Supply Required

Optimal performance requires use of one of the following

AMX PoE power supplies (not included):

•PS-POE-AF-TC, PoE Injector, 802.3AF Compliant

(FG423-83)

•NXA-ENET8-2POE, Gigabit PoE Ethernet Switch

(FG2178-63)

Certifications•UL 60950-1

•FCC Part 15 Class B

•C-Tick CISPR 22 Class B

•CE EN 55022, EN 55024 and EN 60950-1

•IEC 60950-1

•IC

•IEC/EN-60950

•RoHS / WEEE compliant

Environmental•Temperature (Operating): 32°F to 104°F (0°C to 40°C)

•Temperature (Storage): 4°F to 140°F (-20°C to 60°C)

•Humidity (Operating): 20% to 85% RH

•Humidity (Storage): 5% to 85% RH

•Power ("Heat") Dissipation:

On: 22.2 BTU/hr

Standby: 14.3 BTU/hr

Included

Accessories

•MXA-USB-C, USB Port Cover Kit (FG5968-18)

•MXA-CLK, Modero X/S Series Cleaning Kit (FG5968-16)

•MXD-430 Installation Template

Sleep

NFC

Left LEDRight LED

USBRJ45

Button

Sensor

PortPort

frontrear

FIG. 2 BOTTOM VIEW - SHOWING RJ45 AND USB PORTS

FIG. 3 MXD-430 BACK BOX (SIDE VIEW)

RJ45 Port

USB Port

Front

Access

Slot

Access Slot

Backbox

Locking Tab

Termékspecifikációk