Használati útmutató AMX RDA-ENC6B

AMX nincs kategorizálva RDA-ENC6B

Olvassa el alább 📖 a magyar nyelvű használati útmutatót AMX RDA-ENC6B (2 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 4 ember találta hasznosnak és 2.5 felhasználó értékelte átlagosan 4.8 csillagra

Letöltés PDF

Oldal 1/2

QUICK START GUIDE

RDA-ENC6B Radia 6-Space Enclosure with 6 Breakers

Overview

The RDA-ENC6B (FG606-13) enclosure provides secure mounting for AMX Lighting and

ProLink controllers, and lighting modules. These enclosures contain circuit breakers.

They also provide 18 knockouts for 1/2", 3/4", and 1" conduits. They include circuit

breakers and terminals for multi-phase wiring.

These enclosures are CE, UL, and C-UL approved.

Installation Instructions:

• For indoor use only.

• Mount on vertical surface only.

• Maintain 12" (304.88 mm) minimum clearance above and below the enclosure.

• Route class 1 conductors through upper conduit knockouts.

• Route class 2 conductors through lower conduit knockouts.

• Use 75°C (167°F) copper conductors only.

• Install filler plate #28-10500 (RDA-EFP) in all unused openings.

• Install only UL approved modules (see the UL Number Cross Reference to AMX

Lighting ID table).

Enclosure Weights:

• RDA-ENC6B: 16.5 lbs. (7.48 kg)

Dimensions between center lines (from FIG. 2):

RDA-ENC6B:

• A to B = 16.0" (406.4 mm)

• B to C = 22.88" (581.2 mm)

Radia enclosures must be mounted on a vertical surface with a minimum of 12"

(304.8 mm) clearance above and below the enclosure.

Specif ications

• Maximum input wire #1/0 AWG (50mm²)

• Maximum line input is 120 A (per terminal)

• Torque input wire to 44 in-lbs. (5.0 N/m)

• Wire stripping length: 0.67 inches (17 mm)

• Input 1 feeds channels 1, 4, 7, and 10

• Input 2a feeds channels 5 and 11

• Input 2b feeds channels 2 and 8

• Input 3 feeds channels 3, 6, 9, and 12

• Breakers are UL 489 listed 10,000 AIC, 100% Switching Duty, Hydraulic-

Magnetic

The following table cross references the UL ID module numbers and AMX Lighting

module IDs. The modules identified are the only ones that can be used in the RDA-

ENC6B enclosures.

FIG. 1 TOP, FRONT, BOTTOM, AND SIDE VIEWS OF THE RDA-ENC6B ENCLOSURES

TOP VIEW

SIDE VIEW

RDA-ENC6B

24.0"

(610 mm)

18.0"

(457.2 mm)

0.75"

(19.05 mm)

6.0"

(152.4 mm)

RDA-ENC6B Configurations:

- ENC6B/120 20 A Breakers

- ENC6B/240 10 A Breakers

BOTTOM VIEW

Note:

LINE INPUTS: 120 A MAX PER TERMINAL

Use 75° C copper conductors only.

Torque terminals to 44 in-lbs.

(610 mm)

24.0"

FIG. 2 BRACKET CONFIGURATION

UL NUMBER CROSS REFERENCE TO AMX LIGHTING ID

UL ID AMX ID

28-10140 RDD-DM6/120

28-10150 RDD-DM6/240

28-10160 RDD-DM6/277

28-10170 RDA-PSM/120

28-10200 RDM-INC

28-10210 RDM-2INC

28-10260 RDM-3SWM

28-10350 RDM-2FDB

28-10370 RDM-DC,

RDM-2DC,

RDM-3DC

A to B

B to C

Bottom slot

Top slot

Configuration for

right and left

mounting brackets

for all Radia

enclosures.

Maximum mounting

screw size: #12

HARMAN. Oracle, Java and any other company or brand name referenced may be trademarks/registered trademarks of their respective companies.

AMX does not assume responsibility for errors or omissions. AMX also reserves the right to alter specifications without prior notice at any time.

The AMX Warranty and Return Policy and related documents can be viewed/downloaded at www.amx.com.

3000 RESEARCH DRIVE, RICHARDSON, TX 75082 AMX.com | 800.222.0193 | 469.624.8000 | +1.469.624.7400 | fax 469.624.7153

AMX (UK) LTD, AMX by HARMAN - Unit C, Auster Road, Clifton Moor, York, YO30 4GD United Kingdom • +44 1904-343-100 • www.amx.com/eu/

93-0606-13 REV: C

Last Revised: 11/09/2015

FIG. 3 ENC6B AND ENC12B POWER DISTRIBUTION

FIG. 4 ENC6B AND ENC12B INPUT TERMINAL BLOCK WIRING

Note:

LINE INPUTS: 120 A MAX PER TERMINAL

Use 75° C copper conductors only.

Torque terminals to 44 in-lbs.

Termékspecifikációk

Márka:	AMX
Kategória:	nincs kategorizálva
Modell:	RDA-ENC6B
Termék színe:	Fekete
Tömeg:	7500 g
Magasság:	607 mm
Szélesség:	457 mm
Mélység:	152 mm
Maximális áram:	140 A