Használati útmutató AMX VARIA-SL80

Olvassa el alább 📖 a magyar nyelvű használati útmutatót AMX VARIA-SL80 (2 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 9 ember találta hasznosnak és 8 felhasználó értékelte átlagosan 4.8 csillagra

QUICK START GUIDE

VARIA-SL80

Overview

The AMX VARIA-SL80 (AMX-UTP0801) 8” Ultra-Slim, Wall-Mount, Professional-

Grade, Persona-Defined Touch Panel redefines control with personas that fit any

application. Personas include Web Kiosk, Zoom Rooms Controller, AMX Book

Scheduling, and AMX G5 Control.

Microphones

Settings Button

Function Button

Speakers LAN/POE

Side LED USB

FIG. 1AMX VARIA-SL80 Touch Panel

Product Specifications

VariaSL80 SPECIFICATIONS

Dimensions (HWD)

8

13

/

32

” x 5

1

/

32

” x 1

1

/

16

”

(213.22 mm x 127.64 mm x 26.65 mm)

Weight

17 oz (482 g)

Power Consumption

PoE, 802.3af, 15.4 watt, compatible w/ PoE+

External Power

Supply Required

Optimal performance requires use of one of the

following AMX PoE power supplies (not included):

•PS-POE-AF-TC, PoE Injector, 802.3AF

Compliant (FG423-83)

Certifications &

Compliance

•UL

•CE

•CB

•

FCC Class B (-5dB)

Environmental

Operating Temperature

•0°C - 40° C (32°F – 104°F)

•5% - 85% Humidity

Storage Temperature

•-20°C – 60° C (4°F – 140°F)

•

5% - 90% Humidity

Included Accessories

•Mounting Plate

•Mounting Hardware

•Set Screw

VARIA-SL80Installation

The VARIA-SL80 installs into a standard electrical single gang box(US, UK, EU,

AU)using the included mounting plate.

Power Over Ethernet

Poweris supplied via Power Over Ethernet (PoE), utilizing an AMXcertified PoE

injector such as the PS-POE-AF-TC PoE Injector (FG423-83)or compatible

network switchwhich is classified as ES1 and PS2 output in accordance with

IEC/EN/UL 62368-1. Connect the incoming Ethernet cable to the RJ-45 port on

the VARIA-SL80.

Mounting Plate

The included mounting plate contains hole patterns for standard single gang

electricalboxes in US, UK, EU, & AU.

Set Screw Mounting Plate

FIG. 2Mounting Plate

STEP 1: Installation Prerequisites

Prior to touch panel installation, install single gang electricalbox and properly

terminated category cable (networking cable) in accordance with local laws and

building codes.

STEP 2: Install the Mounting Plate

Screw the mounting plate into standard single gangelectrical box using

appropriate hardware for the box.

STEP 3: Route Category Cable

Route the networking cable throughthe large central hole in the mounting plate,

and plug it into the RJ-45 jack on the back of the touch panel.

STEP 4: Mount the Panel to Plate

Using the top tab & slot, insert the panel to the mounting plate. Make sure the

tabs are fully engaged.

STEP 5: Set Screw

Insert & tighten the set screw on the bottom to secure the panel to the mounting

plate.

FIG. 3Back Box Installation Examples

Caution: This product is only suitable for installations less than or equal to 2m

(6.56ft) high for CE/UL safety.

Removing

To remove the panel, follow the installationdirections in reverse.

Termékspecifikációk