Használati útmutató APC NetBotz AP9335T

APC nincs kategorizálva NetBotz AP9335T

Olvassa el alább 📖 a magyar nyelvű használati útmutatót APC NetBotz AP9335T (2 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 5 ember találta hasznosnak és 3 felhasználó értékelte átlagosan 4.7 csillagra

Oldal 1/2
Temperature Sensor (AP9335T)
Installation Instructions
Inventory
Installation
Caution: To avoid damaging the sensor, do not use a tie wrap or wire clip directly on the
sensor when securing it. Use a tie wrap or wire clip, as shown in these instructions, about
half an inch from the end of the sensor.
Note: Use adhesive cable tie holders, tie wraps, and wire clips to secure the sensor cable.
3.96-m (13-ft) temperature sensor (1)
#6 x 3/4-in sheet
metal screw (1)
#8 wall anchor (1)
203-mm (8-in) tie wrap (5) 19-mm x 19-mm (3/4-in x 3/4-in)
adhesive cable tie holder (3)
Wire clip (6)
Customer support and warranty information is available at our Web site, www.apc.com.
© 2010 Schneider Electric. All rights reserved. The Schneider Electric logo is owned by Schneider
Electric Industries, S.A.S., or its affliliated companies.
990-3505A
03/2010
Vertical rail
Door
Wall

Termékspecifikációk

Márka: APC
Kategória: nincs kategorizálva
Modell: NetBotz AP9335T

Szüksége van segítségre?

Ha segítségre van szüksége APC NetBotz AP9335T, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek