Használati útmutató Atdec VF-AT-NBC

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Atdec VF-AT-NBC (4 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 16 ember találta hasznosnak és 9 felhasználó értékelte átlagosan 4.7 csillagra

Installation Instructions

VF-AT-NBC

Component Checklist

Focus | Notebook/Monitor Arm Combo

M4x10/12/16mm (x4)

Phillips Head Mounting Screws

Primary Arm

Cable Cover (x2)

Cable Stops

(x2)

Pole Top Cap

Cable Clips

(x2)

5mm Allen Key

Secondary Arm

Cable Cover (x2)

M8 x 30mm

Screw

M8 x 60mm

Button Head Screw

Hook & Loop

Fasteners (x4 sets)

Bolt Through

Base

Steel Washer

Pole AssemblyDesk Clamp

Assembly

Arm Assembly

Notebook Tray and Arm Assembly

HARDWARE

! IMPORTANT - Install Visidec Focus Notebook/Monitor Arm Combo as per installation instruction.

! This product supports a maximum load of 8kg (17.6lbs).

! The manufacturer accepts no responsibility for incorrect installation.

IMPORTANT INFORMATION:

Step 1. Check Components

Check what you have received against the component checklist and hardware above.

Step 2. Mount Pole Assembly

Option 1: Bolt Through

Tools Required:

• Power Drill

• 9mm (0.35”) Drill Bit

• Phillips Head Screwdriver

Option 2: Mount using Desk Clamp

Pole AssemblyPressure Plate

2.1Remove both the Pressure

plate and M10 Desk Clamp

Screw.

2.2Fasten the Desk Clamp to the Bolt

Through Base & Pole Assembly using the

M8 x 30mm Screw and Tighten Firmly.

M10 Desk Clamp

Screw

M8 x 30mm Screw

Bolt Through Base

Pole Assembly

Slot

Slot Tab

Bolt Through Base

9mm (0.35”) Hole

Steel Washer

M8 x 60mm Button

Head Screw

5mm Allen Key

It is recommended that the Pole Assembly be

mounted towards the rear edge of the work surface.

Note:Ensure that the Slot Tab in the Bolt

Through Base fits snugly into the Slot on the

Pole Assembly.

The Visidec logo on the Bolt Through Base

must face the of this assembly.front

5mm Allen Key5mm Allen Key

Display Mounting Screws

1.1 Drill a 9mm (0.35”) hole in the work surface in

the desired position and assemble as shown below.

Termékspecifikációk