Használati útmutató Atdec TH-UWM

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Atdec TH-UWM (2 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 12 ember találta hasznosnak és 6 felhasználó értékelte átlagosan 4.1 csillagra

Installation Instructions

TH-UWM

Universal Wire Mount

Component Checklist

Hardware

IMPORTANT INFORMATION

! IMPORTANT - Install Telehook Universal Wire Mount as per Installation Instructions.

!

This product supports a maximum load of 50kg (110lbs).

!

This product supports VESA and Universal mounting hole configurations from 200mm up to 800mm wide (8”-31.5”).

! The manufacturer accepts no responsibility for incorrect installation.

Step 1. Check Components

Check you have received all parts against the Component Checklist and Hardware above.

Tools Required:

Phillips head screwdriver

Power drill

4.5mm (

3

/

16

”) drill bit

10mm (

3

/

8

”) masonry drill bit

10mm (

3

/

8

”) drill bit

10mm (

3

/

8

”) socket wrench

Spirit level

Step 2. Fix Universal Wire Mount to Display

Display Mounting Screws:

Wire Reel Assembly

Cable Access Support

M5 x 16mm / M5 x 25mm (x4 each)

M6 x 16mm / M6 x 25mm (x4 each)

M8 x 16mm / M8 x 25mm (x4 each)

Long

Spacer (x4)

Lower Support

M5 Bush (x2)

TM

Hook Plates

(x2)

Flange

Screw (x2)

Short

Spacer (x4)

Dry Wall

Anchor (x2)

Concrete

Anchor (x2)

1 Grip the Wire Reel Assembly

as shown above. Pull firmly to

release wire to suit the Display

mounting hole pattern.

2 Select the appropriate hardware (supplied) to fasten the Wire Reels

LOOSELY to the back of the Display. Use top two mounting holes.

TIP: Only screw in half-way.

OPTIONAL: Use Short or Long Spacers

to pack recessed mounting holes. When

using M5 Mounting Screws use

the M5 Bushes supplied.

M5 Bush

Spacer

Mounting Screw

NOTE: All orange pads

should be facing outwards.

Cable

Access Support

Lower

Support

TOP

3 Fasten Cable Access Support and Lower Support FIRMLY to the

bottom two mounting holes.

PULL

FIRMLY

Wire Reel

Termékspecifikációk