Használati útmutató AXESS 99-3309B
AXESS
nincs kategorizálva
99-3309B
Olvassa el alább 📖 a magyar nyelvű használati útmutatót AXESS 99-3309B (24 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 9 ember találta hasznosnak és 5 felhasználó értékelte átlagosan 4.8 csillagra
Oldal 1/24

Metra. The World’s Best Kits.®MetraOnline.com © COPYRIGHT 2022 METRA ELECTRONICS CORPORATION REV. 10/20/22 INST99-3309B
I N S TA L L AT I O N I N S T R U C T I O N S
99-3309B
Attention! With the key out of the ignition,
disconnect the negative battery terminal
before installing this product. Ensure that all
installation connections are secure before
cycling the ignition to test this product.
KIT FEATURES
• ISO DIN radio provision with pocket
• ISO DDIN radio provision
• Painted matte black
KIT COMPONENTS
• A) Radio trim panel • B) Radio brackets • C) Pocket • D) (4) #8 x 3/8” Phillips screws • E) (10) Panel clips • F) Axxess interface and wiring harness (not
shown)
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
TABLE OF CONTENTS
Dash Disassembly ..................................................2
Kit Preparation .......................................................3
Kit Assembly
–ISO DIN radio provision with pocket ..................4
–ISO DDIN radio provision .....................................4
Axxess Interface Installation ............................. 5-9
WIRING & ANTENNA CONNECTIONS
Wiring Harness: Axxess interface included
Antenna Adapter: 40-EU55
A B C ED
Chevrolet Spark 2013-2015

386.257.1187
|
MetraOnline.com
2
DASH DISASSEMBLY
(Figure A) (Figure B)
1. Unclip and remove the radio trim panel.
(Figure A)
2. Remove (4) Phillips screws securing the
radio. Slide the radio out, then unplug
and remove the radio. (Figure B)
Continue to kit preparation

REV. 10/20/2022 INST99-3309B 3
KIT PREPARATION
(Figure A) (Figure B)
From the factory radio trim panel:
1. Unclip and remove the vents from the
factory panel. (Figure A)
2. Unclip and remove the hazard button
from the trim panel. (Figure A)
3. Remove (5) Phillips screws securing the
upper display shroud from the factory
panel. (Figure A)
Step 1
Step 3
Step 2
Step 3
To the 99-3309B radio trim panel:
1. Clip in the factory vents and hazard
button. (Figure B)
2. Secure the upper display shroud using
the factory screws. (Figure B)
3. Attach the (10) panel clips provided.
Step 1
Step 2
Step 1
Step 2
Termékspecifikációk
Márka: | AXESS |
Kategória: | nincs kategorizálva |
Modell: | 99-3309B |
Szüksége van segítségre?
Ha segítségre van szüksége AXESS 99-3309B, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók nincs kategorizálva AXESS
11 Január 2025
28 December 2024
28 December 2024
28 December 2024
28 December 2024
10 Szeptember 2024
4 Szeptember 2024
4 Szeptember 2024
4 Szeptember 2024
4 Szeptember 2024
Útmutatók nincs kategorizálva
- nincs kategorizálva Infantino
- nincs kategorizálva Nanuk
- nincs kategorizálva MBZ
- nincs kategorizálva Itechworld
- nincs kategorizálva Kahayan
- nincs kategorizálva Howard Leight
- nincs kategorizálva Special-T
- nincs kategorizálva Christmaxx
- nincs kategorizálva Giordani
- nincs kategorizálva Barber Tech
- nincs kategorizálva SolaX Power
- nincs kategorizálva Twisper
- nincs kategorizálva Christmas Time
- nincs kategorizálva Swedish Posture
- nincs kategorizálva Lascar Electronics
Legújabb útmutatók nincs kategorizálva
10 Április 2025
10 Április 2025
10 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025