Használati útmutató AXESS AX-ADXSVI-FT1

AXESS nincs kategorizálva AX-ADXSVI-FT1

Olvassa el alább 📖 a magyar nyelvű használati útmutatót AXESS AX-ADXSVI-FT1 (3 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 11 ember találta hasznosnak és 6 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/3
INSTAX-ADXSVI-FT1
© COPYRIGHT 2004-2013 METRA ELECTRONICS CORPORATION
1-800-221-0932 metraonline.com
REV. 12/17/13
AX-ADXSVI-FT1
Fiat 500 accessory and NAV output CAN interface 2012-up
• Provides accessory (12 volt 10 amp)
• Retains R.A.P. (retained accessory power)
• Usedinbothamplifiedandnon-amplifiedsystems
• Prewired ASWC-1 harness included (ASWC-1 sold separately)
• High level speaker input
• Retains OE BT/USB and 3.5mm audio
• USB updateble
Note: This harness must be used in conjunction with the AX-ADXSVI
APPLICATIONS
FIAT
500 2012-up
WIRING UP THE AX-ADXSVI-FT1
• ConnecttheYellowwiretotheradio’s12voltbatteryormemorywire.
• Connectthe wiretotheradio’sgroundwire.Black
• Connectthe wiretotheignitionwireoftheaftermarketradioRed
• Connectthe wiretotheilluminationwireoftheaftermarketradio.IftheOrange
aftermarketradiohasnoilluminationwire,tapeoffthe wire.Orange
• Connectthe wiretotheradio'sampturnonwire. Blue/White
• Connectthe wiretotheleftfrontpositivespeakeroutputoftheWhite
aftermarketradio.
• Connectthe wiretotheleftfrontnegativespeakeroutputoftheWhite/Black
aftermarketradio.

Termékspecifikációk

Márka: AXESS
Kategória: nincs kategorizálva
Modell: AX-ADXSVI-FT1

Szüksége van segítségre?

Ha segítségre van szüksége AXESS AX-ADXSVI-FT1, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek