Használati útmutató AXESS AXDIS-CL2

Olvassa el alább 📖 a magyar nyelvű használati útmutatót AXESS AXDIS-CL2 (12 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 22 ember találta hasznosnak.

/ 12 PDF

AXDIS-CL2

INSTALLATION INSTRUCTIONS

AxxessInterfaces.com © COPYRIGHT 2024 METRA ELECTRONICS CORPORATION REV. 4/18/24 INSTAXDIS-CL2

ATTENTION: With the key out of the ignition,

disconnect the negative battery terminal before

installing this product. Ensure that all installation

connections, especially the air bag indicator lights, are

plugged in before reconnecting the battery or cycling

the ignition to test this product.

NOTE: Refer also to the instructions included with the

aftermarket accessory before installing this device.

INTERFACE FEATURES

INTERFACE COMPONENTS

TOOLS REQUIRED

• Wire cutter • Crimp tool • Solder gun

• Tape • Small flat-blade screwdriver

• Connectors (example: butt-connectors, bell caps, etc.)

TABLE OF CONTENTS

Applications ...........................................................2

Connections

Non-amplified Models ........................................3

Amplified Models ................................................4

Installation .............................................................5

Programming .....................................................5-6

Adjusting the AXDIS-CL2 .......................................7

Extra features .....................................................7-8

Steering wheel control settings ......................9-12

L.E.D. feedback ....................................................9

Changing radio type .........................................10

Remapping ........................................................10

Dual assignment instructions .....................11-12

Troubleshooting....................................................12

GM Data Interface with SWC 2000-2013

APPLICATIONS

See inside front cover

• Designed for non-amplified, or

analog/digital amplified models

• Provides accessory power

(12-volt 10-amp)

• Retains R.A.P. (Retained

Accessory Power)

• Provides NAV outputs (parking

brake, reverse, speed sense)

• Retains chimes

• Retains audio controls on the

steering wheel

• Retains OnStar

®

/OE Bluetooth

®

• Adjustable OnStar

®

level

• Retains the factory AUX-IN jack

• Retains RSE

(Rear Seat Entertainment) *

• Retains SAT (satellite radio)

• Retains balance and fade

(excludes digital amplified

models)

• Micro “B” USB updatable

• AXDIS-CL2 interface • AXDIS-CL2 harness

• 16-pin harness with stripped leads • 4-pin to 4-pin resistor pad

• Female 3.5mm connector with stripped leads

* The RSE must be activated by the factory radio

Product Info

www.MetraOnline.com

MetraOnline.com may be

used to assist with dash

assembly instructions.

Simply enter your Year,

Make, Model vehicle into

the vehicle fit guide and

look for the Dash Kit

Installation Instructions.

Termékspecifikációk