Használati útmutató AXESS AXHN-1

Olvassa el alább 📖 a magyar nyelvű használati útmutatót AXESS AXHN-1 (4 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 21 ember találta hasznosnak.

/ 4 PDF

CAUTION!

All accessories, switches, climate

controls panels, and especially air bag indicator

lights must be connected before cycling the

ignition. Also, do not remove the factory radio

with the key in the on position, or while the

vehicle is running.

AXHN-1

INSTALLATION INSTRUCTIONS

AxxessInterfaces.com © COPYRIGHT 2020 METRA ELECTRONICS CORPORATION REV. 1/22/20 INSTAXHN-1

INTERFACE FEATURES

INTERFACE COMPONENTS

TOOLS REQUIRED

• Crimping tool and connectors, or solder gun,

solder, and heat shrink • Small flat-blade

screwdriver • Tape • Wire cutter • Zip ties

TABLE OF CONTENTS

Connections to be made .......................................2

Installing the AXHN-1 .............................................3

Programming the AXHN-1 .....................................3

Setting the factory clock .......................................3

Troubleshooting .....................................................3

Honda Clock Retention 2012-2014

APPLICATIONS

• Provides accessory power (12-volt 10-amp)

• Can be used in non-amplified, or amplified models

• Provides NAV outputs (parking brake, reverse, speed sense)

• AXSWC harness included (AXSWC sold separately)

• Retains balance and fade

• Retains the ability to set the factory clock

• Retains the factory AUX-IN jack

• Micro-B USB updatable

• AXHN-1 interface • AXHN-1 harness

• 8-pin subwoofer harness

• 16-pin harness with stripped leads

HONDA

Civic * (without NAV)2013

CR-V (without NAV)2012-2014

* All trims except LX

Termékspecifikációk