Használati útmutató AXESS AXVI-1788

Olvassa el alább 📖 a magyar nyelvű használati útmutatót AXESS AXVI-1788 (5 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 9 ember találta hasznosnak.

/ 5 PDF

AXVI-1788

REV. 1/21/20 © COPYRIGHT 2020 METRA ELECTRONICS CORPORATION

1-800-221-0932 metraonline.com

FEATURES

• Provides accessory power (12-volt 10-amp)

• Retains R.A.P. (retained accessory power)

• Provides NAV outputs (parking brake, reverse, and speed sense)

• Prewired AXSWC harness (AXSWC sold separately)

• Retains balance and fade

• USB updatable

AXVI-1788

Dodge Sprinter 2008-2009 /

Freightliner Sprinter 2008-up

Accessory and NAV Output CAN Interface

Connections to be made

• Connect the Yellow wire to the radio’s 12 volt battery or memory wire.

• Connect the wire to the radio’s ground wire.Black

• Connect the wire to the ignition wire of the aftermarket radio.Red

• Connect the wire to the illumination wire of the aftermarket radio. If the Orange

aftermarket radio has no illumination wire, tape off the wire.Orange

• Connect the wire to the antenna turn on wire of the aftermarket radio.Blue

•

Connect the wire to the left front positive speaker output of the aftermarket radioWhite

.

• Connect the wire to the left front negative speaker output of the White/Black

aftermarket radio.

•

Connect the wire to the right front positive speaker output of the aftermarket radio.Gray

CAUTION!

All accessories, switches, climate controls panels, and especially air bag indicator

lights must be connected before cycling the ignition. Also, do not remove the factory radio with

the key in the on position, or while the vehicle is running.

Termékspecifikációk