Használati útmutató Behringer Bass Overdrive BOD400

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Behringer Bass Overdrive BOD400 (24 oldal) a gitár kategóriában. Ezt az útmutatót 10 ember találta hasznosnak.

/ 24 PDF

BASS OVERDRIVE BOD400

Authentic Tube-Sound Overdrive Eects Pedal

Thank you for showing your condence in us by purchasing the

Behringer BASS OVERDRIVE BOD400. This high-quality eects

pedal is specically designed for bass applications. Thanks to its

high-performance features you will achieve tube-like distortion,

smooth sustain and super fat tone with maximum punch.

1. Controls

(1) The LEVEL control adjusts the output level.

(2) The control allows you to boost/cut the high-frequency range. HIGH

(3) The control allows you to boost/cut the low-frequency range. LOW

(4) Use the control to adjust the amount of overdrive.GAIN

(5) With the BAL(ance) control you can adjust the amount of the dry

direct signal and the eect signal.

(6) The ON/BATT LED illuminates when the eect is activated. It also

serves as a battery level indicator.

(7) Use the footswitch to activate/deactivate the eect.

(8) Use this ¼" TS connector to plug in the instrument cable.IN

(9) The ¼" TS connector sends the signal to your amp. OUT

Use the connection at the front of the unit to plug in a 9 V power DC IN

supply (not included).

The is located on the bottom. Open the lid to BATTERY COMPARTMENT

install or replace the 9 V battery.

◊

◊

◊

◊ ◊ The BOD400 has no on/o switch. As soon as you insert the

jack into the in connector, the BOD400 begins running.

When not using the BOD400, remove the jack from the in

connector. This extends the life of the battery.

The is located on the bottom.SERIAL NUMBER

V 1.0

(1)

(3)

(9) (8)

(5)

(6)

(7)

(4)

(2)

Termékspecifikációk