Használati útmutató Behringer Ultra Metal UM300

Behringer gitár Ultra Metal UM300

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Behringer Ultra Metal UM300 (24 oldal) a gitár kategóriában. Ezt az útmutatót 12 ember találta hasznosnak és 6.5 felhasználó értékelte átlagosan 4.6 csillagra

Oldal 1/24
Thank you for showing your condence in us by purchasing the
Behringer ULTRA METAL UM300. This high-quality eects pedal comes
with a dual-gain circuitry that enables you to produce super thick, tube-
like distortion plus endless sustain. Thanks to its high-performance
features you will achieve the most extreme and sought-after hard rock
or heavy metal distortion sounds.
1. Controls
(1) The control allows yu to boost/cut the lo-frequency range.LOW
Please keep in mind that extrme distortion and EQ
settings will increase nose and may induce oscillation.
(2) The two (uency) controls allow to boost/cut a dè ned MID FREQ
mid-frequency range. The upper control is used to increase
or lower the mid range, the cntrol below adjusts the center
frequency of the mid range that is aected (200 Hz to 5 kHz).
(3) The LEVEL control adjusts the output level.
(4) The LED illumnates when the eect is activated. It also ON/BATT
serves as a battery leve indicator.
(5) Use the footswitch to activate/deactivate the eect.
(6) Use this ¼" TS connector to plug in the instrument cable.IN
(7) The ¼" TS connector sends the signal to your amp. OUT
Use the connection to plug in a 9 V power supply (not included). DC IN
The BATTERY COMPARTMENT is located underneath the pedal cover.
To install or replace the 9 V battery, press the hinges with a ballpen and
remove the pedal cover. Be careful not to scratch the unit.
V .01
ULTRA METAL UM300
Heavy Metal Distortion Eects Pedal
(3)
(1) (5)
(4)
(7)
(2)
(8)
(6)
(9)

Termékspecifikációk

Márka: Behringer
Kategória: gitár
Modell: Ultra Metal UM300

Szüksége van segítségre?

Ha segítségre van szüksége Behringer Ultra Metal UM300, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek