Használati útmutató Blustream UEX100E-KIT

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Blustream UEX100E-KIT (2 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 23 ember találta hasznosnak és 6 felhasználó értékelte átlagosan 4.5 csillagra

UEX100E-KIT QUICK REFERENCE GUIDE

Contact:support@blustream.com.au |support@blustream-us.com support@blustream.co.uk|

UEX100E-KIT

Quick Reference Guide

01

The UEX100E-KIT is a USB extender kit utilising HDBaseT™ technology to extend

USB 2.0, 2CH analogue audio and control signals up to 100m over a single CAT

cable. The UEX100E-KIT allows up to 4 USB devices to be connected to a single

USB host with support for a transmittion data bandwidth up to 480Mbps and is

backwards compatible with USB 1.1 devices. The UEX100E-KIT also provides bi-

directional Power over Cable (PoC), bi-directional IR and RS-232 and 2CH analogue

and Ethernet pass through.

Introduction

FEATURES:

• Extends USB up to a distance of 100m over a single CAT cable using HDBaseT™ Technology

• Supports USB 2.0 signal extension

• Backwards compatible with USB 1.1 devices

• Transmitted data bandwidth up to 480Mbps

• 1x USB-B on Transmitter for connection to host device

• 4x USB-A hub on Receiver for connection to devices

• USB-A ports 1-2 support 5V1A, USB-A ports 3-4 support 5V500mA

• Bi-directional Ethernet pass through (100Mbps)

• Bi-directional IR & RS-232 pass through

• Supports 2CH PCM Analogue Audio pass through (direction selectable)

• Bi-directional PoC (Power over Cable) to power extenders from either transmitter or receiverend

• Simple plug and play, no driver installation or setup required.

*Signal distribution length subject to length of device and host USB cables and CAT cable type

CONFIGUSB HOSTRS-232

1

0

TX RX

24V 1.25AETHERNETHDBT INIR INIR OUTL/R

AUDIO

IN OUT

500mACONFIG RS-2321A

1234

1

0

TX RX

24V 1.25AETHERNETHDBT OUTIR INIR OUTL/R

AUDIO

IN OUT

Termékspecifikációk