Használati útmutató Casio G-Shock DW-5600SB-2ER

Casio óra G-Shock DW-5600SB-2ER

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Casio G-Shock DW-5600SB-2ER (3 oldal) a óra kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/3
Operation Guide 3229/3421
MA1301-EA
© 2013 CASIO COMPUTER CO., LTD.
E-1
About This Manual
•Depending on the model of your watch, display text
appears either as dark figures on a light background
or light figures on a dark background. All sample
displays in this manual are shown using dark figures
on a light background.
•Button operations are indicated using the letters
shown in the illustration.
E-3
Procedure Lookup
The following is a handy reference list of all the operational procedures contained in
this manual.
To set the time and date ......................................................................................... E-6
To switch the backlight function on and off ......................................................... E-9
To set the alarm time ............................................................................................ E-11
To stop the alarm .................................................................................................. E-13
To switch an alarm and Hourly Time Signal on and off .................................... E-13
To set the countdown time .................................................................................. E-14
To use the countdown timer ................................................................................ E-15
To switch auto repeat timing on and off ............................................................. E-16
To measure elapsed time ..................................................................................... E-17
To record split times............................................................................................. E-18
To time first and second place finishes .............................................................. E-18
E-4
General Guide
•Press to change from mode to mode.C
Timekeeping Mode Alarm Mode
Press .C
E-5
•After you perform an operation in any mode, pressing C returns to the Timekeeping
Mode.
•Press in any mode to illuminate the display. Illumination turns off about twoD
seconds after you release .D
Countdown Timer Mode Stopwatch Mode
E-6
Timekeeping
To set the time and date
1. Press while in the Timekeeping Mode. TheA
seconds digits flash on the display because they
are
selected
.
2. Press to change the selection in the followingC
sequence.
Seconds
Day
Hour Minutes
YearMonth
Day of week
Month
Day
Hour
PM indicator
Minutes
Seconds
E-7
3. While the seconds digits are selected (flashing), press to reset the seconds toB
“00”. If you press B while the seconds count is in the range of 30 to 59, the seconds
are reset to “00” and 1 is added to the minutes. If the seconds count is in the range
of 00 to 29, the minutes count is unchanged.
4. While any other digits (besides seconds) are selected (flashing), press to increaseB
the number. Holding down changes the number at high speed.B
•To switch between the 12-hour and 24-hour formats, press DDDDD while some
digits are flashing.
5. After you set the time and date, press to return to the Timekeeping Mode.A
•The day of the week is automatically set in accordance with the date.
•The date can be set within the range of January 1, 2000 to December 31, 2099.
•If you do not operate any button for a few minutes while a selection is flashing, the
flashing stops and the watch goes back to the Timekeeping Mode automatically.
E-8
About the backlight
When you switch the backlight function on, the backlight of the watch flashes
whenever alarm (page E-10), countdown timer or hourly time signal is sounding.
•Pressing at any time illuminates the display, regardless of the backlight’s on/offD
setting.
•The backlight of this watch employs an electro-luminescent (EL) light, which loses
its illuminating power after very long term use.
•Frequent use of the backlight shortens the battery life.
•The watch will emit an audible sound whenever the display is illuminated. This is
caused by a transistor that vibrates when the EL panel lights up. It does not indicate
malfunction of the watch.
•The illumination provided by the backlight may be hard to see when viewed under
direct sunlight.
•The backlight automatically stops illuminating whenever an alarm sounds.
E-9
To switch the backlight function on and off
In the Timekeeping Mode, hold down for about two seconds to switch the backlightB
function on and off. When you switch the backlight function on, an indicator appears
on the display as shown.
Backlight function
on indicator
•The backlight function on indicator remains on the display in all modes until you
switch the backlight function off.
•The above operation controls operation of the backlight function only. It does not
affect operation of audible tones and signals.
E-2
Contents
General Guide ......................................................................................................... E-4
Timekeeping ............................................................................................................ E-6
Alarm ...................................................................................................................... E-10
Countdown Timer ................................................................................................. E-14
Stopwatch .............................................................................................................. E-17
Specifications ....................................................................................................... E-19
Operation Guide 3229/3421
E-10
Mode indicator
Alarm on indicator
DayMonth
Minutes
Hour
Hourly time signal
on indicator
Alarm
You can set an alarm with hour, minutes, month, and
day. When the alarm is on, the alarm sounds for
20 seconds at the preset time. When the Hourly Time
Signal is on, the watch beeps every hour on the hour.
Alarm Types
The types of alarm you get depends on the information
you set.
•To set a daily alarm
Set the hour and minutes for the alarm time. Set “ ”–
for the month and “ ” for the day (see step 3 under– –
“To set the alarm time”). This type of setting causes
the alarm to sound every day at the time you set.
•To set a date alarm
Set the month, day, hour and minutes for the alarm
time. This type of setting causes the alarm to sound
at the specific time, on the specific date you set.
E-11
•To set a 1-month alarm
Set the month, hour and minutes for the alarm time. Set “ ” for the day (see step– –
3 under “To set the alarm time”). This type of setting causes the alarm to sound
every day at the time you set, only during the month you set.
•To set a monthly alarm
Set the day, hour and minutes for the alarm time. Set “ ” for the month (see step 3–
under “To set the alarm time”). This type of setting causes the alarm to sound every
month at the time you set, on the day you set.
To set the alarm time
1. Press while in the Alarm Mode until the hour digits start to flash on the display.A
The hour digits flash because they are
selected
.
•At this time, the alarm is automatically switched on.
2. Press to change the selection in the following sequence.C
Hour
Day
Minutes
Month
E-12
3. Press to increase the selected digits. Holding down changes the number atB B
high speed.
•The format (12-hour and 24-hour) of the alarm time matches the format you select
for normal timekeeping.
•When setting the alarm time using the 12-hour format, take care to set the time
correctly as morning or afternoon.
4. After you set the alarm time, press to return to the Alarm Mode.A
•If you do not operate any button for a few minutes while a selection is flashing, the
flashing stops and the watch goes back to the Alarm Mode automatically.
E-13
To stop the alarm
Press any button to stop the alarm after it starts to sound.
To switch an alarm and Hourly Time Signal on and off
Press while in the Alarm Mode to change the status of an alarm (see “AlarmB
Types” on page E-10) and Hourly Time Signal in the following sequence.
Both off Both onAlarm only Hourly Time Signal only
Hourly time signal on indicator
Alarm on indicator
E-14
Mode indicator
Minutes
SecondsHours
Current time
Countdown Timer
The countdown timer can be set within a range of 1
second to 24 hours. When the countdown reaches
zero, an alarm sounds for 10 seconds or until you press
any button.
To set the countdown time
1. Press while in the Countdown Timer Mode. TheA
hours digit flashes on the display because it is
selected
.
2. Press to change the selection in the followingC
sequence.
SecondsMinutesHours
E-15
3. Press to increase the selected number. Holding down changes the numberB B
at high speed.
•To set the starting value of the countdown time to 24 hours, set .0:00' 00
4. After you set the countdown time, press A to return to the Countdown Timer Mode.
•If you do not operate any button for a few minutes while a selection is flashing, the
flashing stops and the watch goes back to the Countdown Timer Mode automatically.
To use the countdown timer
1. Press while in the Countdown Timer Mode to start the countdown timer.B
2. Press again to stop the countdown timer.B
•You can continue countdown timer operation by pressing .B
3. Stop the timer and then press until the countdown time is reset to its startingA
value.
•When the end of the countdown is reached and auto repeat timing is off, the alarm
sounds for 10 seconds or until you stop the alarm by pressing any button. Countdown
timing stops, and the countdown time is automatically reset to its starting value
after the alarm stops.
E-16
Auto repeat on indicator
1. Press while in the Countdown Timer Mode. TheA
hours digit flashes on the display because it is
selected
.
2. Press to switch auto repeat on and off.D
3. Press to return to the Countdown Timer Mode.A
•When the end of the countdown is reached while
auto repeat is on, the alarm sounds, but the
starting countdown time is reset and countdown
timing starts again automatically whenever the
countdown reaches zero. You can stop timing by
pressing , and manually reset to the startingB
countdown time by pressing .A
To switch auto repeat timing on and off
E-17
Current time
Mode indicator
Minutes
Seconds
1/100 second
The Stopwatch Mode lets you measure elapsed time,
spl it tim es, an d t wo fin ish es. The r ang e o f the
stopwatch is 23 hours, 59 minutes, 59 seconds.
To measure elapsed time
1. Press to start the stopwatch.B
2. Press to stop the stopwatch.B
•You can resume the measurement operation by
pressing again.B
3. Press to clear the stopwatch to all zeros.A
•For the first 60 minutes, the display shows minutes,
seconds, and 1/100 second. After 60 minutes, the
display format changes to show hours, minutes, and
seconds.
Stopwatch
E-18
To record split times
1. Press to start the stopwatch.B
2. Press A to display the timing up to that point. Stopwatch timing continues internally.
3. Press to clear the split time and to continue time measurement on the display.A
•You can repeat steps 2 and 3 as many times as you want.
4. Press to stop the time measurement.B
5. Press to clear the stopwatch to all zeros.A
To time first and second place finishes
1. Press to start the stopwatch.B
2. Press when the first finisher crosses the line, and record the time.A
3. Press when the second finisher crosses the line.B
4. Press to display the finishing time of the second finisher.A
5. Press again to clear the stopwatch to all zeros.A
E-19
Specifications
Accuracy at normal temperature: 15 seconds a month±
Timekeeping: Hour, minutes, seconds, pm (PM), month, day, the day of the week
Time system: Switchable between 12-hour and 24-hour formats
Calendar system: Auto-calendar pre-programmed from the year 2000 to 2099
Alarm: Multi-function alarm, hourly time signal
Countdown Timer
Measuring unit: 1 second
Input range: from 1 second to 24 hours
Other: Auto-repeat function
Stopwatch
Measuring units: 1/100 second (for the first 60 minutes)
1 second (after 60 minutes)
Measuring capacity: 23 hours, 59 minutes, 59 seconds
Measuring modes: Elapsed time, split time and two finishes
Operation Guide 3229/3421
E-20
Illumi nation: EL (electro-luminescent) backlight
Batter y: One lithium battery (Type: CR2016)
Approximately 2 years on type CR2016 (Assuming 3.5 seconds light
operation and 20 seconds alarm operation per day)
Note: Frequent use of the backlight shortens the battery life noted above.

Termékspecifikációk

Márka: Casio
Kategória: óra
Modell: G-Shock DW-5600SB-2ER

Szüksége van segítségre?

Ha segítségre van szüksége Casio G-Shock DW-5600SB-2ER, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók óra Casio

Casio

Casio EFR-571DB Útmutató

30 Március 2025
Casio

Casio Collection LTP-2069L-7A2VEF Útmutató

23 Március 2025
Casio

Casio Edifice EFS-S560DB-1AVUEF Útmutató

23 Március 2025
Casio

Casio Edifice EFR-564D-1AVUEF Útmutató

23 Március 2025
Casio

Casio EQB-700D-1AER Útmutató

23 Március 2025
Casio

Casio GA-100L-8ADR Útmutató

23 Március 2025
Casio

Casio STR300C-1V Útmutató

23 Március 2025
Casio

Casio G-Shock GA-110C-7AER Útmutató

23 Március 2025
Casio

Casio Baby-G BGA-320 Útmutató

6 Január 2025
Casio

Casio EQS-500DB-1A1 Útmutató

23 December 2024

Útmutatók óra

Legújabb útmutatók óra

La Crosse Technology

La Crosse Technology 404-3028A Útmutató

10 Április 2025
La Crosse Technology

La Crosse Technology 404-3028 Útmutató

10 Április 2025
Teesa

Teesa TSA0048 Útmutató

3 Április 2025
Teesa

Teesa TSA0036 Útmutató

3 Április 2025
Citizen

Citizen Zenshin Three-hand AW0130-85A Útmutató

26 Március 2025
Citizen

Citizen Weekender BM8595-16H Útmutató

26 Március 2025
Adidas

Adidas ADH2093 Útmutató

16 Január 2025
Adidas

Adidas ADH1574 Útmutató

16 Január 2025
Adidas

Adidas ADH9002 Útmutató

16 Január 2025
Ascot

Ascot AB6-FW-155B Útmutató

16 Január 2025