Használati útmutató Chauvet Gobozap

Chauvet DJ Gear Gobozap

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Chauvet Gobozap (18 oldal) a DJ Gear kategóriában. Ezt az útmutatót 13 ember találta hasznosnak és 7 felhasználó értékelte átlagosan 3.8 csillagra

Oldal 1/18
Quick Reference Guide
GOBOZAP
EN
1
Gobozap QRG Rev. 2
QUICK REFERENCE GUIDE
About This Guide
The Gobozap Quick Reference Guide (QRG) has basic product information such as mounting, menu options, and DMX
values. Download the User Manual from www.chauvetdj.com
for more details.
Disclaimer
The information and specifications contained in this QRG are subject to change without notice.
LIMITED WARRANTY
FOR WARRANTY REGISTRATION AND COMPLETE TERMS AND CONDITIONS PLEASE VISIT OUR WEBSITE.
For Customers in the United Kingdom, Republic of Ireland, Belgium, the Netherlands, Luxembourg, France, and
Germany::www.chauvetlighting.eu/warranty-registration/
Chauvet warrants that this product shall be free from defects in material and workmanship under normal use, for the
period specified in and subject to the exclusions and limitations set forth in, the full limited warranty on our website. This
warranty extends only to the original purchaser of the product and is not transferable. To exercise rights under this
warranty, you must provide proof of purchase in the form of an original sales receipt from an authorized dealer that shows
the product name and date of purchase. THERE ARE NO OTHER EXPRESS OR IMPLIED WARRANTIES. This
warranty gives you specific legal rights. You may also have other rights that vary from state to state and country to
country. This warranty is valid only in the United States, United Kingdom, Republic of Ireland, Belgium, the Netherlands,
Luxembourg, France, Germany and Mexico. For warranty terms in other countries, please consult your local distributor.
Safety Notes
These Safety Notes include important information about installation, use, and maintenance.
Contact
Outside the U.K., Ireland, Benelux, France, or Germany, contact your distributor to request support or return a product.
Visit Contact Us
for contact information.
What is Included
Always connect the product to a grounded circuit.
Make sure the power cord is not crimped or damaged.
Always disconnect the product from the power source before cleaning it or replacing the fuse.
Never disconnect the product from the power source by pulling or tugging on the cord.
If mounting the product overhead, make sure there is adequate support for the product’s weight
and always secure the product using a safety cable.
Make sure there are no flammable materials close to the product when it is operating.
Avoid direct eye exposure to the light source while the product is on.
Do not touch the product’s housing when the product is operating because the housing can be very hot.
The product is not intended for permanent installation.
The product is for indoor use only. It is rated at IP20.
Do not expose the product to rain or moisture.
Always connect the product to a power source that is within the voltage range stated on the label
or rear panel of the product.
Never connect the product to a dimmer or rheostat.
Make sure to replace the fuse with another of the same type and rating.
Always install the product in a location with adequate ventilation.
Always leave at least 20 in (50 cm) between the product and adjacent surfaces.
Be sure that no ventilation slots on the product’s housing are blocked.
Do not operate the product at an ambient temperature higher than 104 °F (40 °C).
Never carry the product by the power cord or any moving part.
Always use the mounting/hanging bracket to lift the product.
If there is a serious operating problem, stop using the product immediately.
Never try to repair the product. Repairs carried out by untrained people can lead to damage or
malfunction.
To eliminate wear and improve its lifespan, during periods of non-use completely disconnect from
power via breaker or by unplugging it.
Gobozap
•Power cord
Hanging bracket
Quick Reference Guide
!
2
EN
QUICK REFERENCE GUIDE
Gobozap QRG Rev. 2
To Begin
Unpack your Gobozap and make sure you have received all parts in good condition. If the box or contents appear
damaged, notify the carrier immediately, not Chauvet.
AC Power
This product has an auto-ranging power supply that works with an input voltage range of 100 to 240 VAC, 50/60 Hz.
Power linking
It is possible to link up to 6 Gobozap products at 230 V. Never exceed this number. Power-linking cords can be purchased
separately.
Fuse replacement
1. Disconnect the product from power.
2. Wedge the tip of a flathead screwdriver into the slot of the fuse holder.
3. Pry the safety cap out of the housing.
4. Remove the blown fuse from the clip on the front of the safety cap and replace with a fuse of the exact same
type and rating.
5. Re-insert the fuse holder and reconnect power.
Mounting
Before mounting this product, read the Safety Notes. Make sure the mounting clamps used are capable of supporting the
weight of the product.
Mounting diagram
DMX Linking
The Gobozap can work with a DMX controller. If you are not familiar with DMX, download the DMX Primer from
https://www.chauvetlighting.com/downloads/DMX_Primer_rev05_WO.pdf
.
Starting address
To ensure full access to all channels available in each DMX mode, the highest recommended DMX address is 512.
Master/Slave connection
The Gobozap uses the DMX data connection for its Master/Slave mode. Information about configuring the Gobozap for
Master/Slave operation is in the User Manual available from the Chauvet website.
To eliminate wear and improve its lifespan, during periods of non-use completely disconnect the
product from power via breaker or by unplugging it.
!
Overhead Mounting
Mounting bracket
Mounting clamp
Safety cable

Termékspecifikációk

Márka: Chauvet
Kategória: DJ Gear
Modell: Gobozap

Szüksége van segítségre?

Ha segítségre van szüksége Chauvet Gobozap, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek