Használati útmutató Cotech 51097X23

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Cotech 51097X23 (6 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 16 ember találta hasznosnak és 5 felhasználó értékelte átlagosan 4.3 csillagra

GREAT BRITAIN • CUSTOMER SERVICEtel. 020 8247 9300 e-mail customerservice@clasohlson.co.uk internet www.clasohlson.co.uk postal 10 – 13 Market Place, Kingston Upon Thames, Surrey, KT1 1JZ

Ver. 20160526

Remote Controlled

Wall Socket

Art.no 36-6365 Model 51097X23

Please read theentire instruction manual before using theproduct

and then save it for future reference. We reserve theright for any

errors in text or images and any necessary changes made to

technicaldata. In theevent of technical problems or other queries,

please contact our Customer Services.

Things to consider:

• Other wireless equipment using thesame frequency band can

reduce thetransmissionrange.

• Therange of all wireless equipment depends on thetype of

obstacles located between thetransmitter and thereceiver

(e.g. aconcrete wall will interfere with thesignal more than

aplasterboard wall).

If you experience problems, try thefollowing:

• Turn off any other existing wireless equipment to check

whether this is thecause of theproblem.

• Reposition thewireless equipment, shorten thedistance

between thetransmitter and thereceiver or reduce

thenumber of obstacles (walls, furniture,etc.) betweenthem.

Installation

Note: Ifyou are at all unsure how to install theproduct, contact

acompetent person or qualified electrician.

1. Make sure that thewires that you are connecting thewall

socket to are energised. De-energise thecircuit by not

removing thefuse or opening thecircuit breaker.

4. Connect thewires to thecorresponding terminals on

thewallsocket:

-L = Line (live/phase)

-N = Neutral

- = Protectiveearth

5. Attach thewall socket to thewallbox.

2. Press [ OFF ] for thechannel on theremote control that you

wish to unpair thewall socketfrom. TheLED indicator on

thewall socket will stop flashing.

3. It is still possible to switch thewall socket on and off using

thepairing button.

Deleting all information from the wall socket

If more than one device paired with thewall socket, they can all be

deleted at thesametime.

1. Hold in thepairing button for 6 seconds. TheLED indicator

willflash.

2. Release thebutton.

3. All information will now be deleted.

Troubleshooting guide

Thewall

socket

does

notwork.

• Is thewall socket paired with theremote control

as instructedabove? Trypairing themagain.

• Check that thedevice (e.g. light) which is connected

to thewall socket is switched on and not faulty.

• Is thewall socket too far from theremote control?

• Is thesignal being blocked by furniture or

furnishings?

Responsible disposal

2. Unscrew theold wall

socket from thewall box

and disconnect thewires.

3. Remove thewallplate.

6. Refit thewallplate.

7. Turn thepoweron.

Operating instructions

Pairing the wall socket with a remote control

1. Hold in thepairing button for 3 seconds. TheLED indicator

willflash.

2. Press [ ON ] for thechannel on theremote control that you

wish to pair thewall socketwith. Holdthebutton in until

theLED indicator on thewall socket stops flashing.

3. Switch thewall socket on and off using theON/OFF buttons

on theremote control or with thepairing button.

Deleting the wall socket from a remote control

1. Hold in thepairing button for 3 seconds. TheLED indicator

willflash.

This symbol indicates that this product should not

be disposed of with general householdwaste.

Thisapplies throughout theentire EU. Inorder to

prevent any harm to theenvironment or health

hazards caused by incorrect waste disposal,

theproduct must be handed in for recycling so that

thematerial can be disposed of in aresponsible

manner. Whenrecycling your product, take it to

your local collection facility or contact theplace

of purchase. Theywill ensure that theproduct is

disposed of in anenvironmentally sound manner.

Specifications

Mains voltage 230V AC, 50 Hz

Frequency 433.92 MHz

Range 25m

Termékspecifikációk