Használati útmutató Cotech EMP416S

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Cotech EMP416S (5 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 6 ember találta hasznosnak és 3.5 felhasználó értékelte átlagosan 4.1 csillagra

Oldal 1/5
UNITED KINGDOM CUSTOMER SERVICE
tel 020 8247 9300
e-mail
customerservice@clasohlson.co.uk
internet
www.clasohlson.co.uk postal 10 – 13 Market Place, Kingston upon Thames, Surrey, KT1 1JZ
Ver. 20180921
Surge Suppressor
Art.no. 36-1258 Model EMP416S
Please read theentire instruction manual before using theproduct and save it for future reference. We reserve
theright for any errors in text or images and any necessary changes made to technical data. If you have any
questions regarding technical problems please contact our Customer Services.
Safety
Thesurge suppressor should only be connected to
anearthed indoor wall socket.
Check that all connected devices are rated at
thesame mains supply voltage (230 V 50 Hz).
Make sure that theelectrical socket that theproduct
is plugged into is easily accessible in case it
and theconnected product need to be quickly
disconnected from themains electricity.
Do not connect products of this type to each other.
Do not cover theproduct.
Note: Thesurge suppressors switch should be in
theon position and be lit for theoutlets to carry current I
and be operational.
Note: Thegreen (PROTECT) indicator must be lit in
order for thesurge suppressor feature to be operational.
If thegreen (PROTECT) indicator does not light, this
indicates that thesurge suppressor feature is no longer
operational. Thedevice will continue to function as
astandard extension lead but surge protection will no
be provided to any connected devices.
Product description
Thesurge suppression feature is designed to protect
connected devices during e.g. thunder storms.
Note! Thesurge suppression feature will not protect
against near or direct lightning strikes.
Safety shuttered.
Equipped with two varistors, agas discharge tube
and two fuses.
Protection status indicator.
On/off switch. Turns theoutlets on and off.
Wall bracket.
Operating instructions
1. Check that all devices to be connected to thesurge
suppressor are first turned off.
2. Check that thesurge suppressor’s switch is also
turned off ( ) before plugging thedevices into O
thesockets in thesurge protector.
3. Plug thesurge suppressor into awall socket.
4. Switch thesurge suppressor’s power switch to
theon position . Theswitch and green (PROTECT) I
indicator should be lit.
5. Switch on theconnected device/s.
Responsible disposal
This symbol indicates that this product
should not be disposed of with general
householdwaste. Thisapplies throughout
theentire EU. Inorder to prevent any
harm to theenvironment or health
hazards caused by incorrect waste
disposal, theproduct must be handed
in for recycling so that thematerial
can be disposed of in aresponsible
manner. Whenrecycling your product,
take it to your local collection facility or
contact theplace of purchase. Theywill
ensure that theproduct is disposed of in
anenvironmentally sound manner.
Specifications
Max load 230 V AC, 50 Hz, 16 A (3,680 W)
Type lll
Uoc P-N = 2.5 kV
P/N-E = 5.0 kV
Max overvoltage 6,000 V
Max current spike Outlet L-N: 4,500 Apulse for 8/20 μs
Outlet L-E : 4,500 Apulse for 8/20 μs
Outlet N-E: 4,500 Apulse for 8/20 μs
Max energy
uptake 165 joules pulse form for
10/1,000 μs (outlet)
Reaction time < 1 ns
Lead HO5VV-F 3G 1.5 mm²

Termékspecifikációk

Márka: Cotech
Kategória: nincs kategorizálva
Modell: EMP416S

Szüksége van segítségre?

Ha segítségre van szüksége Cotech EMP416S, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek