Használati útmutató Cotech IPC30SA1A

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Cotech IPC30SA1A (4 oldal) a Megkönnyebbülés kategóriában. Ezt az útmutatót 19 ember találta hasznosnak és 10 felhasználó értékelte átlagosan 4.9 csillagra

Oldal 1/4
UNITED KINGDOM
www.clasohlson.co.uk
Ver. 20220406
LED Floodlight
Art.no 36-7617-1, 36-7617-2, 36-7618-1, 36-7618-2
Model IPC15A1A-B, IPC15A1A-W, IPC30SA1A-B, IPC30SA1A-W
Please read theentire instruction manual before use and then save it for
future reference. Wereserve theright for any errors in text or images and any
necessary changes made to technicaldata. Intheevent of technical problems or
other queries, please contact our Customer Services.
Safety
This product is extremely bright. Donot look directly into thelight, doing so
could cause eye damage.
Never let children play with theproduct.
The product should only be connected to an earthed 230 V AC, 50 Hz
mains outlet.
Theproduct must not be used in rooms where explosive gases or liquids are
used or stored.
Treat theproduct with care and do not subject it to shocks or impacts.
Never immerse theproduct in water or other liquid.
Theproduct must not be covered.
Never try to open thehousing, repair or modify theproduct in anyway.
Never use theproduct if your hands are moist orwet.
Never use theproduct if it, its mains lead or plug is damaged in anyway.
All repairs must be carried out by qualified service technicians using genuine
spareparts.
Themains lead should be checked regularly. Ifthemains lead is damaged in
any way it must be replaced by aqualified electrician.
Installation
Fasten thefloodlight to afirm, level surface.
Do not mount thefloodlight where there is arisk of it falling into water or
other liquids.
Warning
Make sure that thewall has no concealed electrical wiring, gas or water
pipes before drilling/screwing.
Make sure that thepower supply to thefloodlight is switched off/isolated.
Thefloodlight should be connected to apower supply protected by asafety
device such as aresidual current circuit breaker/residual current device
(RCCB/RCD).
TheLED module in thelighttting must not be replaced by anyone other
than aqualified electrician.
Specifications
36-7617-1
Rated voltage 220–240V AC, 50/60Hz
Power 15W
Colour Black
Light source COB-LED, 1400 lm (non-replaceable)
Colour temperature 4000K
Colour rendition > 80 Ra
Beam angle 120°
IP rating IP65
Protection class Class 1 (theproduct must be earthed)
Operating temperature −20 to 40 °C
Connecting cable 80 cm, H05RN-F3G1.0 mm²
Size 15×12×4.2cm
36-7617-2
Rated voltage 220–240V AC, 50/60Hz
Power 15W
Colour White
Light source COB-LED, 1400 lm (non-replaceable)
Colour temperature 4000K
Colour rendition > 80 Ra
Beam angle 120°
IP rating IP65
Protection class Class 1 (theproduct must be earthed)
Operating temperature −20 to 40 °C
Connecting cable 80 cm, H05RN-F3G1.0 mm²
Size 15×12×4.2cm
36-7618-1
Rated voltage 220–240V AC, 50/60Hz
Power 30W
Colour Black
Light source COB-LED, 2600 lm (non-replaceable)
Colour temperature 4000K
Colour rendition > 80 Ra
Beam angle 120°
IP rating IP65
Protection class Class 1 (theproduct must be earthed)
Operating temperature −20 to 40°C
Connecting cable 80 cm, H05RN-F3G1.0 mm²
Size 17.5×14.5×5cm
36-7618-2
Rated voltage 220–240V AC, 50/60Hz
Power 30W
Colour White
Light source COB-LED, 2600 lm (non-replaceable)
Colour temperature 4000K
Colour rendition > 80 Ra
Beam angle 120°
IP rating IP65
Protection class Class 1 (theproduct must be earthed)
Operating temperature −20 to 40 °C
Connecting cable 80 cm, H05RN-F3G1.0 mm²
Size 17.5×14.5×5cm
1. Use thewall bracket as atemplate
and mark out where thescrew holes
are to be drilled.
Note: You don’t need to detach
thewall bracket from thefloodlight,
it pivots to make it easier to mark
out holes for drilling and screwing in
mounting screws.
2. Use anappropriate type of screw
for thewall material and attach
thebracket to thewall.
3. Tilt thefloodlight to thedesired angle
and tighten thescrews fastening
thewall bracket to thefloodlight.
Care and maintenance
Clean thefloodlight by first switching it off and then wiping it with adrycloth.
Important
If theglass on thefront of thefloodlight is damaged, it must be replaced before
thefloodlight is usedagain. Thefloodlight must not be used if theglass is
damaged or missing.
Responsible disposal
This symbol indicates that this product should not be
disposed of with general householdwaste. Thisapplies
throughout theentire EU. Inorder to prevent any harm to
theenvironment or health hazards caused by incorrect
waste disposal, theproduct must be handed in for recycling
so that thematerial can be disposed of in aresponsible
manner. Whenrecycling theproduct, take it to your local
collection facility or contact theplace of purchase. Theywill
ensure that theproduct is disposed of in anenvironmentally
sound manner.

Termékspecifikációk

Márka: Cotech
Kategória: Megkönnyebbülés
Modell: IPC30SA1A

Szüksége van segítségre?

Ha segítségre van szüksége Cotech IPC30SA1A, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek