Használati útmutató CRUX CTY-02T

Olvassa el alább 📖 a magyar nyelvű használati útmutatót CRUX CTY-02T (2 oldal) a tolatókamera kategóriában. Ezt az útmutatót 9 ember találta hasznosnak.

/ 2 PDF

Crux Interfacing Solutions • 21541 Nordhoff Street, Unit C, Chatsworth, CA 91311

phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com

CTY-02T

Tailgate Handle Camera for

TOYOTA TACOMA 2006 - 2015

- Replaces the factory tailgate handle and adds a backup camera.

- 170 degree wide view angle for excellent visibility.

- Super CMOS technology provides a sharper picture day and night.

- Maintains the OEM look.

PRODUCT FEATURES:

PARTS INCLUDED:

R

INTERFACING SOLUTIONS

Sightline

CAMERAS

1. Tailgate handle camera

2. 26’ extension cable

INSTALLATION INSTRUCTIONS:

1. Start by lowering the tailgate of the truck. Remove the screws that secure the tailgate cover.

2. Aer removing the tailgate cover you will have access to the backside of the factory tailgate handle. Using a

10mm socket, remove the (2) nuts holding the tailgate handle in place. Undo the tailgate latch rods. Li up on

the latch to release the (2) tailgate handle studs and remove the tailgate handle.

3. Re-assemble the new tailgate handle into the tailgate in reverse order. Do not put back the tailgate cover unl

aer tesng the camera.

4. Route the Video and Power cables from the tailgate to the boom of the truck. Route the the camera power

wires to the tail light assembly. Tap the RED wire to the +12V reverse light wire and the BLACK wire to ground.

Connue to route the video cable towards the radio and plug in the video RCA to the back of the aermarket

radio of back up camera interface reverse camera input.

5. Test the camera for funconality then put back the tailgate cover.

rev.12072021

1 of 2

Termékspecifikációk