Használati útmutató CRUX RVCCH-75R

Olvassa el alább 📖 a magyar nyelvű használati útmutatót CRUX RVCCH-75R (3 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 11 ember találta hasznosnak.

/ 3 PDF

RVCCH-75R

Rear View with VIM Integration Interface and

Tailgate Handle Camera for RAM Trucks

R

INTERFACING SOLUTIONS

Sightline

Multi View Integration

Crux Interfacing Solutions • Chatsworth, CA 91311

phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com

rev.0922201 of 3

• Acvates Mygig radio for enabling video features

• Tailgate handle camera included

• Interface includes Audio / Video Input to connect an extra A/V source

• Automacally switches to Rear-view when car is in Reverse mode

• Supports vehicles with manual transmission but does not supply +12V Reverse Trigger. Camera power

must be tapped from the +12V reverse light wire instead

• Plug & Play Installaon

PRODUCT FEATURES:

PARTS INCLUDED:

RVCCH-75R ModuleRVCCH-75R HarnessTailgate Handle Camera

INSTALLATION DIAGRAM:

WHITE Wire

Parking Guideline

DP

ON

DIP

SWITCH

LED

LED RED = Power ON Status

LED BLUE = Data Bus ON Status

Regulator

20 Ft. Coax Cable

8-Pin Molex

TO RADIO

WHITE

22-PIN

(MALE)

GRAY

22-PIN

(MALE)

WHITE

22-PIN

(FEMALE)

GRAY

22-PIN

(FEMALE)

TO FACTORY

HARNESS

Tap Green wire to +12V ACC for non

permanent VIM. Set DIP 1 to OFF.

(toggle switch not included)

WHITE Wire*

(Camera Power Output

+12V 250mA)

RED Wire

Tape O

(Not Used)

*Note that the white wire does not supply Reverse Trigger on Manual

Transmission and should be insulated .Camera power must be connected

to factory reverse light wire instead.

To Source Ground

(ground wire)

(not chassis ground)

A/V OUT

A/V INPUT

To +12V ACC

Termékspecifikációk