Használati útmutató CRUX SWRFT-53

Olvassa el alább 📖 a magyar nyelvű használati útmutatót CRUX SWRFT-53 (2 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 12 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.9 csillagra

RADIO REPLACEMENT

SWC RETENTION

+

R

INTERFACING SOLUTIONS

Crux Interfacing Solutions • Chatsworth, CA 91311

phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com

rev.072322

SWRFT-53

Radio Replacement with Steering Wheel Retention

for select Fiat Vehicles

1 of 2

PRODUCT FEATURES:

PARTS INCLUDED:

-Retains factory features in select Fiat vehicles while funconing with an aermarket radio.

-Retains Steering Wheel Controls via built-in, pre-programmed interface.

-With navigaon outputs (Reverse gear , Illuminaon and Speed signal).

-Provides Accessory Power ( 2A MAX ).

SWRFT-53 MODULESWRFT-53 HarnessSWC Cables

INSTALLATION DIAGRAM:

AFTERMARKET

RADIO

illumination (+)Orange

Reverse Gear Red/White

Vehicle Speed Sense Purple/White

+12V ConstantYellow

+12V ACCRed

GroundBlack

Right Front (+)Gray

Right Front (-) Gray/Black

Left Front (+)White

Left Front (-) White/Black

Right Rear (+)Violet

Right Rear (-) Violet/Black

Left Rear (+)Green

Left Rear (-) Green/Black

TO FACTORY

HARNESS

12-Pin Black

Connector

1 2 3

ON

4-Pin

Connector

Option A:

Option B:

Cap or insulate if

not being used

BLUE / YELLOW

3.5MM SWC CABLES (Option A or B)

Use the proper 3.5MM to 4-Pin cable for your radio.

Plug in the selected 3.5MM SWC cable to the 4-pin port

on the module. See “DIP SWITCH SETTINGS” section.

To aftermarket

Radio SWC Port

For Kenwood & JVC

NOTES:

1.Driver informaon display will show the last informaon that was shown prior to removing the radio.

2.Does not retain the factory Bluetooth or Sirius Satellite radio.

3.The radio is designed to shut o when the key is removed.

4.For non-amplied vehicles only.

Termékspecifikációk