Használati útmutató CRUX SWRMZ-64C

Olvassa el alább 📖 a magyar nyelvű használati útmutatót CRUX SWRMZ-64C (3 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 16 ember találta hasznosnak és 8.5 felhasználó értékelte átlagosan 5.0 csillagra

Crux Interfacing Solutions • Chatsworth, CA 91311

phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com

rev.092120

SWRMZ-64C

Radio Replacement with Steering Wheel Control Retention

for Select MAZDA Vehicles

1 of 3

RAD IO RE PLAC EMENT

SWC RE TENTION

+

R

INTERFACING SOLUTIONS

- Retains factory features in Select Mazda vehicles while funconing with an aermarket radio.

- Pre-programmed to retain factory Steering Wheel Controls.

- Retains factory Bluetooth steering wheel control buons (if equipped - see page 2).

- Supports vehicles with analog Bose® audio systems.

- EIA color coded wiring for easy installaon.

PRODUCT FEATURES:

PARTS INCLUDED:

SWRMZ-64C Module SWRMZ-64C HarnessSWC Cable

INSTALLATION DIAGRAM:

AFTERMARKET

RADIO

+12V Constant Yellow

+12V ACC Red

Ground Black

Illumination Orange

Amp Turn On Blue/ White

Right Front (+) Gray

Right Front (-) Gray/Black

Left Front (+) White

Left Front (-) White/Black

Right Rear (+) Violet

Right Rear (-) Violet/Black

Left Rear (+) Green

Left Rear (-) Green/Black

TO FACTORY

HARNESS

12-Pin Black

Connector

4-Pin

Connector

Cap or insulate if

not being used

Kenwood/JVC (BLUE / YELLOW)

3.5MM SWC CABLE

Plug in the 3.5MM SWC cable to the 4-pin port

on the module. See “DIP SWITCH SETTINGS” section.

ON RADIOVEHICLE

1 2 3 4 5 6 7 8

AFTERMARKET

RADIO SELECTOR

(See Chart)

MAZDA

SWC SETTING

(OFF ON ON ON)

ON RADIOVEHICLE

1 2 3 4 5 6 7 8

SWC BT

INPUT

SWC Phone

To aftermarket

radio SWC port

Termékspecifikációk