Használati útmutató Doepfer A-112

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Doepfer A-112 (24 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 12 ember találta hasznosnak és 8 felhasználó értékelte átlagosan 4.9 csillagra

doepfer System A - 100Sampler A-112

1

1. Introduction

Module A-112 (SAMPLER) is a combination module,

including a voltage controlled 8 bit Samplerand a

voltage controlled Wavetable Oscillator.

The module has the characteristic “grungy“ sound

of the early 8 bit Samplers and is a welcome addi-

tion to the A-100’s sound generating capabilities.

But it should not be compared with the polyphonic 16

bit MIDI samplers available on the market.

The module contains an A/D converter(ADC) for

recording the audio signal (8 bit resolution), digital

memory for storage of the the sampled signal, a D/A

converter (DAC) for playback and the control unit.

The memory is divided into two banks (S1, S2) with 64

kbyte each. In wavetable mode each bank is arranged

as 256 pages of 256 bytes.

The memory is non-volatile, i.e. after power-off the

sampling data in the memory is maintained.

Gate In

A-112

SAMPLER

Audio IN /

Wave-CV In

CV In

Audio Out

Modus

Man. Trig.

MIDI In

MIDI Out

Atten.

Tune

Run

Termékspecifikációk