Használati útmutató Doepfer A-99

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Doepfer A-99 (6 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 27 ember találta hasznosnak és 5 felhasználó értékelte átlagosan 4.5 csillagra

doepfer System A - 100Spring ReverbA-199

1

1. Introduction

Module A-199 is a spring reverb module that simula-

tes the reverb effect by means of 3 spiral springs. The

3-spring system

used in the A-199 ensures a "dense"

reverb because of the different properties of the three

springs. The A-199 implies some special features that

are not self-evident for spring reverb units:

The reverb signal can be fed back to the input using

the Feedback control. Even self-oscillation of the

springs similiar to the self-oscillation of filters is avai-

lable. The feedback loop can lead even via external

modules like VCA, VCF, phaser, frequency shifter, vo-

coder, distortion/waveshaper, ring modulator and

others.

Another feature is the Emphasis control. This enables

the adjustment of the accentuation of middle frequen-

cies (around ~ 2kHz).

With the Mix control the relation between original and

reverb signal appearing at the mix output is adjusted.

Using all these features very extreme and unusual ef-

fects can be generated with the A-199.

Level

Level

Emphasis

ext.

Feedb.

In

A-199

SPRV

Mix

Reverb

Out

Mix

Out

Feedback

Pay attention to the power supply recommendation at

the end of this manual (page 6) if you are about to

plan an A-100 system that includes an A-199.

Termékspecifikációk