Használati útmutató Drayton HTS3

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Drayton HTS3 (41 oldal) a Grillplaat kategóriában. Ezt az útmutatót 29 ember találta hasznosnak és 9 felhasználó értékelte átlagosan 4.7 csillagra

06490287001

ISS

A

HTS3Cylinder

Thermostat

Installationinstructions

TechnicalData

SettingRange

50°–80°C

Differential

8°Capprox.

Switchrating

3(1)A230Vac

Switchtype

SPDT

Earth

Doubleinsulated

–notrequired

Connections

C–common

1–call

2–satisedfi

Fixing

Plastic-coatedspringwire

withhookandeyelet.

Cylinderthermostats

MakeModelCommonCallSatisfied

HTS3C12

LifestyleHTS2RBY

Danfoss

Randall

AT(CN4)123

ATAG

CS1/CS 21

23

HoneywellL641AC12

Landis

&Gyr

RAM1123

Potterton

Myson

PTT1LHC

Sunvic1452/

SA2451

312

SopacSAYC12

SmithsSCT1123

TowerCS1RBY

BarloCT1RBY

Pollution Degree

2

Ball pressure

Test Temperature

110ºC

Rated impulse

voltage

2.5kV

20//E1435U –LowVoltageDirective

2011/65/E – Restriction of the Use of CertainU

Hazardous Substances (RoHS)

Energy Class

I = 1% (Acc. EU

811/2013, 812/2013,

813/2013, 814/2013)

Conformstotheessentialrequirements

ofthefollowing directives:

204//E– Electromagnetic ompatibility130UC Directive

What is a cylinder thermostat?

...an explanation for householders

Acylinder thermostat switches on and off the heatsupply from the boiler

to the hot-water cylinder. Itworks by sensing the temperature of the water

inside the cylinder, switching on the water heatingwhen the temperature

falls below the thermostatsetting, and switching it off once this set

temperature has been reached.

Turning a cylinder thermostat to a higher settingwill not make the water

heat up any faster. Howquickly the water heats up depends on the

designof the heating system, for example, the size ofboiler and the heat

exchanger inside the cylinder.

The water heating will not work if a time switch orprogrammer has

switched it off. And the cylinderthermostat will not always switch the

boiler off,because the boiler sometimes needs to heat the radiators.

Cylinder thermostats are usually fitted betweenone quarter and one third

of the way up thecylinder. The cylinder thermostat will have atemperature

scale marked on it,and it should beset at between 60C and 65C, then left

to do its job.This temperature is high enough to kill off harmfulbacteria in

the water, but raising the temperatureof the stored hot water any higher

will result inwasted energy and increase the risk of scalding.

If you have a boiler control thermostat, it shouldalways be set to a

higher temperature than thatof the cylinder thermostat. In most boilers,

asingle boiler thermostat controls the temperatureof water sent to both

the cylinder and radiators,although in some there are two separate

20//E1219U –WEEE Directive

ATAG

ATAG

ATAG

ATAGATAG

Technology Ltd

Technology Ltd

Technology Ltd

Technology Ltd Technology Ltd

80 Churchill Square Business Centre

Kings Hill

West Malling

Kent

M19 4YUE

Technical Tel: 0800 254 5065

Email: technical@atagheating.co.uk

Website: www.atagheating.co.uk

Termékspecifikációk