Használati útmutató Elba ETM-E3320

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Elba ETM-E3320 (1 oldal) a Wekkerradio kategóriában. Ezt az útmutatót 29 ember találta hasznosnak és 6 felhasználó értékelte átlagosan 4.4 csillagra

A Tap Body

B Rubber O-ring

C Sink top or Work top

D Rubber O-washer

E Metal O-washer

F Threaded fixing bushing

G Flexi bose

H Rubber O-ring for flexi hose

1. An opening hole of 35mm diameter is required on sink top or work topfor installation of tap.

2. Slide the rubber O-ring (B) over the threaded tube and up to the base of tap (A).

3. Insert the threaded tube through the hole of sink top or work top (C) and position the tap properly.

4. Slide the rubber O-washer (D) and metal O-washer (E) over the threaded tube and up to the underside of

sink top or work top (C).

5. Screw the fixing bushing (F) up to the metal O-washer (E).

6. Connect the fle

xi hoses (G) to the extension tube on one end and the hot or cold water supply on the other

end. Please ensure that the hot water supply goes through the hot flexi hose while the cold water supply goes

through the cold flexi hose.

(C)

ETM-E3820

●Before installation, please ensure that the following work

conditions are adhered to:

-Water temperature between 0C - 90C˚˚

-Water pressure between 0.05MPa –1.0MPa. Pressure reducing

valve is necessary if pressure exceeds 1.2MPa

-Avoid major pressure di

fferences between hot and cold water

supply

●Flush pipes thoroughly before and after installation to ensure

water supply is free of any debris.

●Inspect tap fitting and debugged to its best. Do not attempt to

disassemble fitting on your own.

●Use thread sealant tape (PTFE) on any screw joining

connections and ensure all joints are securely tightened.

ETM-E3320ETM-E2920ETM-E3920

This . FIAMMA SDN. BHD. will not be held responsible for the use of superseded or voided specifications.

Fabricatoe must check for cut-out accuracy.

specification is subject to change without notice

StainlessSteelMixerTap

Termékspecifikációk