Használati útmutató Electro-Voice RE27N/D

Electro-Voice mikrofon RE27N/D

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Electro-Voice RE27N/D (2 oldal) a mikrofon kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF

Oldal 1/2

RE27N/D

Variable-D® N/DYM®

Dynamic Cardioid

Microphone

General Description:

Technical Specifications:

:tnemelEgnitareneG erutcurtStengaMMYD/NcimanyD

:esnopseRycneuqerF zH000,02-54

:nrettaPraloP dioidraC

:ecnadepmI decnalabsmho051

tiucriCnepO,ytivitisneS

:egatloV

zHk1=lacsap/Vm1.3

Bd0(zHk1,leveLrewoP

:)lacsaP/Vm1=

Bd15-

lacipyt,leveLpukciPmuH

detsreoillim1/zH06(

:)dleif

mBd031-

:ytiraloP niPotdecnereferevitisopeblliw2niP

mgarhpaidnoerusserpevitisophtiw3

:lairetaMesaC leetS

,snoisnemiD

:htgneL ).ni35.8(mm7.612

:retemaiDtsediW ).ni41.2(mm4.45

:retemaiDydoB ).ni49.1(mm2.94

:hsiniF lekcinnitaS

:thgieWteN )zo9,bl1(g907

:thgieWgnippihS )zo3,bl3(g644,1

:dehsinruFseirosseccA pmalcdnats51718

:seirosseccAlanoitpO rofretpadadnatsdetnuom-kcohsA903

moobgnidrocerrodnatsroolfhtiwesu

The Electro-Voice RE27N/D is a professional-quality dynamic

cardioid microphone designed for broadcast production

announce and voice-over, high-quality recording and sound

reinforcement applications. The RE27N/D utilizes a

revolutionary neodymium-alloy magnet and a reinforced

diaphragm dome, a combination offering increased sensitivity

(up to 6-dB more output), undistorted output at high sound

pressure levels and an extended high-frequency response.

The exceptional sensitivity of the RE27N/D, excellent transient

response and inherently low noise of the dynamic transducer,

all combine to ensure a superior signal-to-noise ratio, easily

comparable to the finest condenser cardioid microphones. to

further reduce noise, a highly effective hum-bucking coil is

used to attenuate hum from lighting and other sources. The

RE27N/D’s continuously Variable-D‚ design reduces bass-

boosting “proximity effect” to maintain a uniform low-frequency

response, up-close or at a distance. Two easily operated bass

roll-off switches, offering a sharp low-frequency cut at 200 Hz

or a gentle roll-off, are available for special situations where

bass attenuation is required. A third switch is available for

reducing the high-frequency treble boost. The true, uniform

cardioid polar pattern of the RE27N/D offers the greatest

rejection at 180° off axis, insuring superior gain-before-

feedback. An integral blast and wind filter covers each acoustic

opening on the RE27N/D, allowing “close-talk” situations with

no worry of “P-pop,” breath sounds or excessive sibilance.

Part of the filter also shock mounts the internal microphone

transducer, reducing the transfer of vibration from external

sources. This shock-mount system along with the extremely

rugged exterior steel casing allows the RE27N/D to withstand

all the rigors of professional use.

Key Features:

• Studio condenser performance from self-

generating transducer

• Consummate announce microphone

• Ideal for sampling

• Switch-selected E.Q.

• Effective internal shock, pop and wind

protection

• Exceptional sensitivity assures high signal-

to-noise

12000 Portland Avenue South, Burnsville, MN 55337

Phone:952/884-4051, Fax:952/884-0043

www.electrovoice.com

Part Number 534679 Rev D

U.S.A. and Canada only. For customer orders, contact Customer Service at:

800/392-3497 Fax: 800/955-6831

Europe, Africa, and Middle East only. For customer orders, contact Customer Service at:

+ 49 9421-706 0 Fax: + 49 9421-706 265

Other International locations. For customer orders, contact Customer Service at:

+ 1 952 884-4051 Fax: + 1 952 736-4212

For warranty repair or service information, contact the Service Repair department at:

800/553-5992 or 402/467-5321

For technical assistance, contact Technical Support at:

800/392-3497 or 952/736-4656

Specifications subject to change without notice.

Dimension Drawing:

Frequency Response: Wiring Diagram:

Polar Response:Architects’ and Engineers’

Specifications:

The microphone shall be a dynamic cardioid with integral blast

filter protecting all acoustic openings. The blast filter shall also

serve as a shock mount for the internal microphone transducer.

The microphone shall have a wide-range uniform frequency

response from 45-20,000 Hz. Integral passive networks,

controlled with three recessed slide switches, shall be provided

with switches in the “flat” position, the microphone shall be

essentially flat from 80-2,000 Hz with a 6-dB rise in response

from 2,000-16,000 Hz. With one filter switch in the “roll-off”

position, low-frequency response shall tilt down 6 dB from 250

to 100 Hz. A second filter switch, when in the “roll-off” position,

shall have a gentle roll-off of 12 dB from 1,000 to 100 Hz. The

third filter switch, when in the “roll-off” position shall decrease

the high-frequency rise by 3 dB. The open circuit voltage

sensitivity shall be 3.1 mV/Pascal at 1,000 Hz and the power

level sensitivity shall be -51 dB at 1,000 Hz (0 dB equals 1 mW/

pascal.) The magnetic circuit shall be a nonwelded circuit and

employ a neodymium alloy magnet. The transducer shall employ

a hum-bucking coil, with a resulting hum sensitivity of -130 dBm

at 60 Hz in a 1 millioersted field, and a shield to prevent dust

and iron particles from reaching the diaphragm. Rated

impedance shall be 150 ohms. Line shall be balanced to ground

and phased. Pin 2 shall have a positive voltage with reference

to Pin 3 with positive pressure on the diaphragm. Response at

any angular position away from the major axis shall be essentially

similar to the response on the major axis, except uniformly at all

frequencies by an amount appropriate to that angular position.

Polar characteristics shall be sufficiently uniform in all planes

so that it is, effectively, a cardioid of revolution. The case shall

be made of steel. The microphone shall have a maximum

diameter of 54.4 mm (2.14 in.), a body diameter of 49.2 mm

(1.94 in.) and a length of 216.7 mm (8.53 in.). The finish shall

be nonreflecting satin nickel. A stand clamp shall be supplied.

The Electro-Voice RE27N/D is specified.

RE27N/D Part Number:

• 16271446

Termékspecifikációk

Márka:	Electro-Voice
Kategória:	mikrofon
Modell:	RE27N/D

Szüksége van segítségre?

Ha segítségre van szüksége Electro-Voice RE27N/D, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek

Az Ön neve*

Az Ön e-mail címe*

Írja ide kérdését

Útmutatók mikrofon Electro-Voice

Electro-Voice RE92L Útmutató

4 Január 2025

Electro-Voice PL44 Útmutató

31 December 2025

Electro-Voice PL80c Útmutató

18 Szeptember 2024

Electro-Voice ND44 Útmutató

12 Szeptember 2024

Electro-Voice RE50N/D-B Útmutató

28 Augusztus 2024

Electro-Voice RE420 Útmutató

7 Augusztus 2024

Electro-Voice R300-E Útmutató

31 Július 2024

Electro-Voice ND76S Útmutató

30 Július 2024

Electro-Voice ND96 Útmutató

30 Július 2024

Electro-Voice RE520 Útmutató

30 Július 2024

Útmutatók mikrofon

Legújabb útmutatók mikrofon

Røde NT1 Signature Series Útmutató

10 Április 2025

Genesis Radium 400 G2 Útmutató

9 Április 2025

Ambient TinyMike ATM216 Útmutató

9 Április 2025

Ambient Sound Fish ASF-1 MKII Útmutató

9 Április 2025

Ambient ASF-G Útmutató

9 Április 2025

Ambient Soundfish 2 MkII Útmutató

9 Április 2025

Ambient UMP III Útmutató

9 Április 2025

Comica VP3 Útmutató

2 Április 2025

Atlas Sound MWHHM Útmutató

2 Április 2025

Synco G2A1 Útmutató

2 Április 2025