Használati útmutató Emko EPM-3790
Emko
nincs kategorizálva
EPM-3790
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Emko EPM-3790 (3 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 9 ember találta hasznosnak és 5 felhasználó értékelte átlagosan 4.9 csillagra
Oldal 1/3
2.2 Panel Cut-Out
2. General Descr pt on� �
2.1 Front V ew and D mens ons of EPM-3790 Un t� � � �
EPM-3790N 77x35 DIN S ze �
Control Panel For V/F Speed Controller
Instruct on Manual. ENG EPM-3790-N 01 V03 07/23 �
Operat ng Temperature :�0 to 50 °C
Max. Operat ng Hum d ty :� � � 90 Rh (non-condens ng)�
:Alt tude�Up to 2000m
Forb dden Cond t ons:� � �
Corros ve atmosphere�
Explos ve atmosphere�
Home appl cat ons (The un t s only for ndustr al appl cat ons)� � � � � � � �
1.2 General Spec f cat ons� � �
1 Preface
2
1.1 Operat ng Cond t ons� � �
3 41615
13 14
EPM-3790N
Power Supply Input
D g tal Input� �
110 mm / 4.33 nch (m n)� �
50 mm / 1.97 nch (m n)� �
29 mm / 1.14 nch�
71 mm / 2.79 nch�
1.3 Installat on�
1.4 Warranty
1.5 Ma ntenance�
1.6 Manufacturer
Mount ng Clamp�
Panel surface
Max mum th ckness 15 mm / 0.59 nch� � �
76 mm / 3 nch�
6 mm / 0.24 nch�
34,5 mm / 1.36 nch�
65 mm / 2.56 nch�
Error Input
EPM-3790N
SET
9. Order ng Informat on� �
A BC D E FG HI /
/
U
V W Z/
/
0 00 1 0 0
EPM-3790N
00 0
(77 x 35 DIN S ze)�
RS-485 Commun cat on Interface� �
1.RS-485 Module
2. PROKEY Programm ng Module�
Your technology partner
www.emkoelektronik.com.tr
EPM-3790N
7. Motor Start / Stop Operat on�
EPM-3790N
SET
i
8. Spes f cat ons� � �
Dev ce Type�
Hous ng & Mount ng� �
Protect on Class�
We ght�
Env ronmental Rat ng� �
Storage / Operat ng Temperature�
Storage / Operat ng Hum d ty� � �
Installat on�
Overvoltage Category
Pollut on Degree�
Scale
Analogue Output
Resolut on�
Supply Voltage and Power
D splay�
LEDs
: Control Panel For V/F Speed Controller
: 77mm x 35mm x 62.5mm Plast c hous ng for panel� �
Mount ng. Panel cut-out s 71x29mm.� �
: Approx mately 200 grams�
: Standard, ndoor at an alt tude of less than 2000 meters� �
w th none-condens ng hum d ty.� � � �
: F xed Installat on� �
: II.
: II. Off ce or workplace, none conduct ve pollut on� � �
: Between -1999 and 9999
: 12 b ts�
: 10 mm red 4 d g ts LED� �
:Compl ances�
: -40 C to +85 C / 0 C to +50 C
: 90 % max. (None condens ng)�
: NEMA 4X (IP65 at front, IP20 at rear).
: 0/2...10V Voltage Output (Max.10mA) orZ
0/4...20mA Current OutputZ
D g tal Output� �
: Forward D rect on Output (Max. 5mA@30V)� �
Reverse D rect on Output (Max. 5mA@30V)� �
D g tal Input� �
: Error Input (Max. 5mA@30VZ)
M n. H gh Level 7V )� � Z
Max. Low Level 5V )Z
Fluctuat on�
: 30 mV
0
9. Opt onal Accessor es� �
SET
Standard
D g tal Output� �
In accordance w th the WEEE regulat on.� �
Please leave the dev ce to a recycl ng po nt for electr cal dev ces.� � � � �
: 230V (±%15) 50/60Hz - 2.5VAV
: 115V (±%15) 50/60Hz - 2.5VAV
: 24V (±%15) 50/60Hz - 2.5VAV
: 24V (±%15) 50/60Hz - 2.5VAW
: 10 - 30V 2.5WZ-
- 4 D g ts D splay� � �
- Adjustable dec mal po nt� �
- Set value low l m t and set value h gh l m t boundar es� � � � � �
- Adjustable ramp up and ramp down t me�
- Eas ly adjustable set value from front panel�
- Conf gurable d splay scale between -1999 and 9999� �
- Forward, Reverse d rect on outputs and error nput for V/F Speed � � �
Controller
- 0/2...10V Voltage output or 0/4...20mA Current outputZ Z
(It must be spec f ed n order.)� � �
- Password protect on for programm ng and sett ngs sect ons� � � �
EPM-3790N 77x35 DIN S ze�
Control Panel For V/F Speed Controller
EPM-3790-N ser es un ts are des gned for controll ng the speed and d rect on of the motor as � � � � � �
a control panel for V/F Speed Controllers n ndustry. They can be used n many appl cat ons � � � � �
w th the r easy use and operat on w th the r ramp propert es.� � � � � �
Un versal Supply Input�
230V (±%15) 50/60HzV
Opt onal Supply Input�
115V (±%15) 50/60HzV
24V (±%15) 50/60HzV
24V (±%15) 50/60HzW
10 - 30V Z
Forward D rect on Output� �
Reverse D rect on Output� �
Analogue Output
(0/2...10V )Z
Analogue Output
(0/4...20mA )Z
Reference Speed for
V/F Speed Controller
Front Panel
IP65 protect on �
NEMA 4X
Before beg nn ng nstallat on of th s product, please read the nstruct on manual and � � � � � � �
warn ngs below carefully.�
c
Th s package conta ns� �
- A dev ce un t� �
- Two p eces of mount ng clamps� �
- An nstruct on manual� �
A v sual nspect on of th s product for poss ble damage occured dur ng sh pment s recommended before � � � � � � � �
� � � � � � � � � � � � � �nstallat on. It s your respons b l ty to ensure that qual f ed mechan cal and electr cal techn c ans nstall th s product.
If there s danger of ser ous acc dent result ng from a fa lure or defect n th s un t, power off the system and the � � � � � � � �
electr cal connect on of the dev ce from the system. � � �
The un t s normally suppl ed w thout a power supply sw tch or a fuse. Use power sw tch and fuse as requ red. � � � � � � �
Be sure to use the rated power supply voltage to protect the un t aga nst damage and to prevent fa lure. � � �
Keep the power off unt l all of the w r ng s completed so that electr c shock and trouble w th the un t can be � � � � � � �
prevented.
Never attempt to d sassemble, mod fy or repa r th s un t. Tamper ng w th the un t may results n malfunct on, electr c � � � � � � � � � � �
shock or f re.�
Do not use the un t n combust ble or explos ve gaseous atmospheres. � � � �
Dur ng the equ pment s putted n hole on the metal panel wh le mechan cal nstallat on some metal burrs can cause � � � � � � � �
�njury on hands, you must be careful.
Installat on of the product on a system must be done w th the prov ded f x ng clamps. Do not attempt to nstall the � � � � � �
dev ce w th nappropr ate f x ng clamps. Make sure to keep the dev ce steady dur ng the nstallat on.� � � � � � � � � �
It s your respons b l ty f th s equ pment s used n a manner not spec f ed n th s nstruct on manual.� � � � � � � � � � � � � � �
EMKO Elektron k warrants that the equ pment del vered s free from defects n mater al and workmansh p. Th s warranty s � � � � � � � � �
prov ded for a per od of two years. The warranty per od starts from the del very date. Th s warranty s n force f duty and � � � � � � � �
respons b l t es wh ch are determ ned n warranty document and nstruct on manual performs by the customer completely.� � � � � � � � �
Repa rs should only be performed by tra ned and spec al zed personnel. Cut power to the dev ce before access ng nternal � � � � � � �
parts. Do not clean the case w th hydrocarbon-based solvents (Petrol, Tr chlorethylene etc.). Use of these solvents can � �
reduce the mechan cal rel ab l ty of the dev ce. Use a cloth dampened n ethyl alcohol or water to clean the external plast c � � � � � � �
case.
Manufacturer Informat on:�
Emko Elektron k Sanay ve T caret A. .� � � Ş
Bursa Organ ze Sanay Bölges , (Feth ye OSB Mah.) � � � �
Al Osman Sönmez Bulvar , 2. Sokak, No:3 16215 � ı
BURSA/TÜRK YEİ
Phone : +90 224 261 1900
Fax
: +90 224 261 1912
Repa r and Ma ntenance Serv ce Informat on:� � � �
Emko Elektron k Sanay ve T caret A. .� � � Ş
Bursa Organ ze Sanay Bölges , (Feth ye OSB Mah.) � � � �
Al Osman Sönmez Bulvar , 2. Sokak, No:3 16215 � ı
BURSA/TÜRK YEİ
Phone : +90 224 261 1900
Fax : +90 224 261 1912
A
Power Supply
2
3
5
8
4
9
Customer Spec f ed� �
24V (±%15) 50/60Hz - 2.5VAW
24V (±%15) 50/60Hz - 2.5VAV
115V (±%15) 50/60Hz - 2.5VAV
230V (±%15) 50/60Hz - 2.5VAV
10 - 30V - 2.5WZ
5
Voltage Output (0/2...10V max. 10 mA) Z
Output
E
Current Output (0/4...20mA )Z
4
All order nformat on of EPM-3790N un ts are g ven on the table above. User may form � � � �
appropr ate dev ce conf gurat on from nformat on and codes that at the table and convert t � � � � � � �
to the order ng codes. F rstly, supply voltage then other spec f cat ons must be determ ned. � � � � � �
Please f ll the order code blanks accord ng to your needs. Please contact us, f your needs � � �
are out of the standards.
Please set the parameters accord ng to des red cond t ons before operat ng the dev ce. � � � � � �
Improperly conf gured dev ce may cause hazard.� �
Module for upload ng and download ng� �
the user parameters
V Symbol means Vac,
Z Symbol means Vdc,
Please don't d spose the dev ce along w th other waste at the end of ts serv ce l fe.� � � � � �
Thank you for your nterest n EMKO Elektron k � � �
products. In order to download a more deta led vers on � �
of th s manual, please v s t us at our webs te.� � � �
: (red), (red), (red), (red), (green), (green)
When Start/Stop button s pressed, Set value s seen on d splay, Start led l ghts on, selected � � � �
d g tal output s be ng act ve and analogue output starts to ncrease from the set low l m t � � � � � � � �
value to set value dur ng �Tup(sec) t me w th ramp.� �
Wh le the motor s runn ng f Start/Stop button s pressed aga n set low l m t value s seen on � � � � � � � � �
d splay, Start led l ghts off, analogue output starts to decrease from set value to set low l m t � � � �
value dur ng t me. When analogue output s equal to set low l m t value selected �Tdown(sec) � � � �
d g tal output s be ng nact ve.� � � � � �
It s val d, f the dev ce type 0/2...10V� � � �
It s val d, f the dev ce type 0/4...20mA� � � �
Z
Z
analogue output.
analogue output.
If no operat on s performed n programm ng mode for 20� � � �
seconds, dev ce turns to operat on screen automat cally.� � �
(1)
(2)
Error Detect on for �
V/F Speed Controller
Forward, Reverse D rect on� �
Control for V/F Speed Controller
Protect on Aga nst � �
Mechan cal Impacts� : 1Joule (IK06)
,
,
Termékspecifikációk
| Márka: | Emko |
| Kategória: | nincs kategorizálva |
| Modell: | EPM-3790 |
Szüksége van segítségre?
Ha segítségre van szüksége Emko EPM-3790, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók nincs kategorizálva Emko
30 December 2025
30 December 2025
30 December 2025
30 December 2025
30 December 2025
30 December 2025
29 Augusztus 2024
29 Augusztus 2024
28 Augusztus 2024
28 Augusztus 2024
Útmutatók nincs kategorizálva
- nincs kategorizálva BabyZen
- nincs kategorizálva Maktec
- nincs kategorizálva Baumr-AG
- nincs kategorizálva Dell
- nincs kategorizálva Ruark Audio
- nincs kategorizálva Connect IT
- nincs kategorizálva Mooer
- nincs kategorizálva Testboy
- nincs kategorizálva Adam Hall
- nincs kategorizálva BabyHome
- nincs kategorizálva Ocean Way Audio
- nincs kategorizálva 4moms
- nincs kategorizálva Glock
- nincs kategorizálva Salter
- nincs kategorizálva Graff
Legújabb útmutatók nincs kategorizálva
10 Április 2025
10 Április 2025
10 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025