Használati útmutató Emko ESD-9950-N
Emko
Termosztát
ESD-9950-N
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Emko ESD-9950-N (2 oldal) a Termosztát kategóriában. Ezt az útmutatót 18 ember találta hasznosnak és 9.5 felhasználó értékelte átlagosan 3.8 csillagra
Oldal 1/2
ESD-9950-N
SET
°C
°F
P
O1
O2
+ -
S
3
2
1
4
5
ESD-9950-N
SET
°C
°F
P
O1
O2
+ -
S
+
°C
°F
P
O1
O2
++
S
+
°C
°F
P
O1
O2
++
S
+
°C
°F
P
O1
O2
++
S
+
°C
°F
P
O1
O2
++
S
+
°C
°F
P
O1
O2
++
S
+
°C
°F
P
O1
O2
++
S
+
°C
°F
P
O1
O2
++
S
+
°C
°F
P
O1
O2
++
S
+
°C
°F
P
O1
O2
++
S
+
°C
°F
P
O1
O2
++
S
+
°C
°F
P
O1
O2
++
S
+
°C
°F
P
O1
O2
++
S
Note1: PID control parameters ( , , , , ,
) are not seen when parameter s set as .�
Note2: On Off control parameters ( , ) are not seen
when output control type parameter ( ) s set as .�
Note3: Alarm parameters ( , , , , , )
are not seen when output type parameter ( ) s set as . �
Note4: Alarm parameters( , , , , ) are not
seen when alarm type parameter ( ) s set as . �
Note5: If s d fferent from and user enters on password � �
screen, parameter values are observed but can not be
changed.
Access, Change and Record the Parameter Values
Note : If no operat on for 20 seconds on Parameters Screen, dev ce automat cally return Ma n Screen .� � � �
Instruct on Manual. ENG ESD-9950-N 01 V05 05/18�
Front Panel Def n t on� � �
Temperature Un t Ind cator� �
Programm ng Mode Ind cator� �
Status of Control Output 1 (Relay)
Status of Control Output 2 (SSR)
Encoder Button
ESD-9950-N TEMPERATURE CONTROLLER
ESD-9950-N Temperature Controller
- 4 d g ts d splay� � �
- Temperature sensor nput (TC / RTD) �
- Adjustable Process Offset Value
- Programmable ON/OFF, P, PI, PD ve PID control types
- Adaptat on of PID coeff c ents to the system by Auto Tune/Self Tune � � �
- Programmable control and alarm funct ons for control outputs�
ESD-9950-N temperature controllers are des gned for measur ng and � �
controll ng a temperature value n ndustry. They can be used n many � � � �
appl cat ons w th the r TC and RTD temperature measurement nput, mult -� � � � � �
funct on control outputs, programmable control and alarm funct ons.� �
They are ma nly used n glass, plast c, petro-chem stry, text le, automot ve and � � � � � �
mach ne product on ndustr es. Accurate and advanced controll ng s � � � � � �
performed w th selectable ON-OFF, P, PI, PD, PID, Self Tune PID, Auto Tune �
PID funct ons.�
SPECIFICATIONS
INPUT
Process Input: TC/RTD
Thermocouple (TC): J, K, R, S, T and L (IEC584.1)(ITS90)
Thermores stance (RTD):� Cu-50 and Pt100 ( IEC 751) (ITS90)
Measurement Range: Please refer to parameter n parameters sect on.� �
Accuracy: ± 0.25% of scale for thermocouple and thermores stance.�
Cold Junct on Compensat on:� � Automat cally ±0.1°C/1°C�
L ne Compensat on: � � Max mum 10 Ohm�
Sensor Break Protect on:� Upscale
Sampl ng Cycle: �0.1 second
CONTROL
Control Forms: ON/OFF, P, PI, PD veya PID (Control form can be
programmed by the user.)
OUTPUT
Process Output: Relay(7A@250V at res st ve load) or SSR Dr ver Output V� � �
(Max mum 10mA, Max. 17V )�Z
Alarm Output:Relay (7A@250V at res st ve load)V� �
DISPLAY
Temperature D splay:� 16 mm Red 4 d g ts LED D splay� � �
Led Ind cators:� O1 (Relay Process Output Status LED), O2 (SSR Process
Output Status LED), P(Programm ng Mode LED),S(Set Value LED),ºC, ºF LEDs�
ENVIRONMENTAL RATINGS and PHYSICAL SPECIFICATIONS
Operat ng Temperature:� 0...50ºC
Hum d ty :� � 0-90%RH (none condens ng)�
Protect on Class: �IP65 at front , IP20 at rear
We ght: �350 gr.
D mens on: � � 96 x 96 mm, Depth: 100 mm
Panel CutOut: 92 x 92 mm
SUPPLY VOLTAGE
230V (±15%) 50/60Hz - 3VAV
115V (±15%) 50/60Hz - 3VAV
24V (±15%) 50/60Hz - 3VAV
Must be determ ned � �n order.
Panel Mount ng�
Electr cal W r ngs� � �
To reduce the effect of electr cal no se on dev ce, low voltage l ne (espec ally sensor � � � � �
� � � � �nput cables) w r ng must be separately from h gh current and voltage l ne. If
poss ble, use sh elded cable abd sh eld must be connected to ground only one s de.� � � �
Panel Cut-out
92 mm / 3.62 nch(m n)� �
92 mm / 3.62 nch(m n)� �
129 mm / 5.08 nch(m n)� �
129 mm / 5.08 nch(m n)� �
Note : If no operat on for 10 seconds, dev ce automat cally ex ts from Set Value Screen w thout sav ng the value.� � � � � �
Access and Change Set Value
Press encoder button
to observe the set value.
Turn left encoder button
to decrease or turn r ght �
to ncrease the set value.�
Press encoder button
to save new set value
and return the ma n screen �
ESD-995 0-N
ESD-995 0-N
Ma n Screen�
ESD-995 0-N
Ma n Screen�
ESD-995 0-N
Set Value Screen Set Value Screen
Press encoder
button
dur ng 5 seconds. �
Approve password
w th encoder button.�
Enter the password
w th encoder button.�
Turn left encoder button
to decrease or turn r ght �
to ncrease value.�
If no pr vacy lock dent f cat on � � � � �
Parameters Screen w ll be �
observed. If pr vacy lock s � �
� � � �dent f ed, w ll be
observed. Press encoder button
to access Password Screen.
ESD-995 0-N
SET
Ma n Screen�
SET
Password Screen
SET
Password Screen Parameters Screen
If Parameters Screen is
active, "P" led blinks. To
observe previous
parameter, turn encoder
button left. To observe
next parameter, turn
encoder button right.
Press encoder button to
observe parameter value.
Parameters Screen
ESD-995 0-N
Parameters Screen
ESD-995 0-N
Parameters Screen
ESD-995 0-N
Parameters Screen
Turn encoder button
left to observe
previous parameter or
turn right to observe
next parameter.
Turn encoder button
left to observe
previous parameter or
turn right to observe
next parameter.
Turn encoder button
left to observe
previous parameter or
turn right to observe
next parameter.
Turn encoder button
left to observe
previous parameter or
turn right to observe
next parameter.
Press encoder button
to observe
the parameter value.
ESD-995 0-N
Parameters Screen
To increase parameter
value, turn encoder
button right. Press
encoder button to save.
To decrease parameter
value, turn encoder
button left. Press encoder
button to save.
D mens ons� �
96 mm / 3.78 nch�
96 mm / 3.78 nch�
84 mm / 3.31 nch�
11.5 1mm / 0.45 nch�
Max mum 15 mm / 0.59 nch� �
1- Before mount ng the dev ce n your panel, � � �
make sure that the cutouts s of the r ght � �
s ze.�
2- Check front panel gasket pos t on.� �
3- Insert the dev ce through the cutout. If the �
mount ng clamps are on the un t, put out � �
them
before nsert ng the un t to the panel.� � �
4- Insert the mount ng clamps to the two of�
des gnated holes that located on four s des � �
of dev ce.�
5- Drag the mount ng clamps n d rect on 5� � � �
unt l the dev ce completely mmob le w th n � � � � � �
the panel.
6- In order to remove dev ce push on the �
mount ng clamp as shown w th arrow 6 and � �
pull back.
Parameter Values Screen Parameter Values Screen
Temperature Un t Ind cator� �
Set Value Ind cator�
SETSET
°C
°F
P
O1
O2
+
++
S
SET
°C
°F
P
O1
O2
+
++
S
SET
°C
°F
P
O1
O2
+
++
S
SET SET
°C
°F
P
O1
O2
+
++
S
Relay Output
TC
PT-100
45 10 11 12 13 14 15
7A@250VV
6 7 8 9
NCCNO
-
+
10mA@17VZ
SSR Dr ver�
Output
ESD-9950-N
CAT II
O2
(Process
Output 2)
O1
(Process Output 1
or
Alarm Output)
Process Input
(Analog Input)
Supply
Voltage
Supply
Voltage
Sw tch�
N
L
1A T
Fuse
N
L
Termékspecifikációk
| Márka: | Emko |
| Kategória: | Termosztát |
| Modell: | ESD-9950-N |
Szüksége van segítségre?
Ha segítségre van szüksége Emko ESD-9950-N, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók Termosztát Emko
1 Szeptember 2024
25 Augusztus 2024
25 Augusztus 2024
25 Augusztus 2024
25 Augusztus 2024
25 Augusztus 2024
10 Augusztus 2024
Útmutatók Termosztát
- Termosztát Vaillant
- Termosztát Oventrop
- Termosztát King
- Termosztát Google
- Termosztát Econo-Heat
- Termosztát Helios (Amfra)
- Termosztát Oertli
- Termosztát Grohe
- Termosztát Aube
- Termosztát Computherm
- Termosztát Remeha
- Termosztát HomePilot
- Termosztát Wattio
- Termosztát Heimeier
- Termosztát Extraflame
Legújabb útmutatók Termosztát
9 Április 2025
7 Április 2025
7 Április 2025
6 Április 2025
6 Április 2025
6 Április 2025
5 Április 2025
4 Április 2025
4 Április 2025
3 Április 2025